EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of AMC Welding Wire and Inline Hot Rolling for Enhanced Properties of DED-Arc/Wire-Manufactured Parts

Tim Sebastian Tübbicke, Fabian Dittrich, Sebastian Härtel

Key Engineering Materials · 13.04.2026 · 1047 · 231-241

DOI: 10.4028/p-w0oilu ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.04.2026. Verfasst von Tim Sebastian Tübbicke und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The wire arc directed energy deposition (DED-Arc/wire) process offers great potential for the additive manufacturing of large-volume components thanks to high deposition rates and cost-effective plant technology. Aluminium matrix composites (AMCs) are a high-performance alternative to conventional aluminium alloys, but their use in additive manufacturing has been limited so far due to porosity, restricted mechanical properties and a lack of semi-finished wire products. This paper presents a resource-efficient inline process chain for the additive manufacturing of silicon carbide-reinforced (SiC) AMCs (AMC-SiC). Since commercial AMC-SiC welding wires are not available, an AMC-SiC wire was produced from an aluminium tube (AW-6060) filled with AMC-SiC chips by means of multi-stage rotary swaging to a diameter of 1.6 mm. The DED-Arc/wire welding tests carried out demonstrate the basic processability of the developed wire, but with pronounced porosity in the weld seam. By integrating an inline hot rolling process, the weld bead was significantly deformed and the porosity was significantly reduced, thereby expanding the application potential of additively manufactured AMC-SiCs.

Zitieren

APA

Tübbicke, T. S., Dittrich, F., & Härtel, S. (2026). Development of AMC Welding Wire and Inline Hot Rolling for Enhanced Properties of DED-Arc/Wire-Manufactured Parts. Key Engineering Materials, 1047, 231-241. https://doi.org/10.4028/p-w0oilu

Vancouver

Tübbicke TS, Dittrich F, Härtel S. Development of AMC Welding Wire and Inline Hot Rolling for Enhanced Properties of DED-Arc/Wire-Manufactured Parts. Key Engineering Materials. 2026;1047:231-241. doi:10.4028/p-w0oilu

BibTeX
@article{Tbbicke2026,
  author = {Tübbicke, Tim Sebastian and Dittrich, Fabian and Härtel, Sebastian},
  title = {Development of AMC Welding Wire and Inline Hot Rolling for Enhanced Properties of DED-Arc/Wire-Manufactured Parts},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1047},
  pages = {231--241},
  doi = {10.4028/p-w0oilu}
}
Kostenlos starten →