Numerical Study on the Bending Behavior of OTEC Cold Water Pipes Considering Geometric Imperfections
Key Engineering Materials · 13.11.2026 · 1064 · 59-64
DOI: 10.4028/p-tuhw62 ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.11.2026. Verfasst von Rasgianti Rasgianti und 6 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben.
Abstract (Originalsprache)
Ocean Thermal Energy Conversion (OTEC) is a marine energy technology that utilizes the temperature difference between surface seawater and deep seawater to generate electricity. One of the main components in this system is the Cold Water Pipe (CWP), which functions to transport cold seawater from deep ocean layers to the power generation system. The long pipe structure with a large diameter-to-thickness ratio makes it susceptible to bending deformation. This study aims to analyze the effect of geometric imperfections on the bending capacity of CWP pipes using the Finite Element Method (FEM). The numerical model was validated through a benchmarking process against a bending formulation, with a deviation of 2.64%. A parametric study was conducted on circumferential imperfections in the form of sinusoidal waves with variations in amplitude and number of waves. The results show that increasing imperfection amplitude reduces the bending capacity, while increasing the number of waves tends to increase the ultimate moment value. This behavior is likely related to the denser wave distribution along the longitudinal direction of the pipe, which may create a local stiffness effect similar to a stiffener element, thereby improving the structural resistance against bending deformation. Variations in imperfection configuration result in changes in the UM value of up to 24.1%, indicating that imperfection characteristics have a significant influence on the bending response of the CWP structure.
Zitieren
APA
Rasgianti, R., Aprilana, A., Sulistiyowati, D., Kautsar, H. A. A., Adiputra, R., Prabowo, A. R., & Srinivasamurthy, S. (2026). Numerical Study on the Bending Behavior of OTEC Cold Water Pipes Considering Geometric Imperfections. Key Engineering Materials, 1064, 59-64. https://doi.org/10.4028/p-tuhw62
Vancouver
Rasgianti R, Aprilana A, Sulistiyowati D, Kautsar HAA, Adiputra R, Prabowo AR, et al. Numerical Study on the Bending Behavior of OTEC Cold Water Pipes Considering Geometric Imperfections. Key Engineering Materials. 2026;1064:59-64. doi:10.4028/p-tuhw62
BibTeX
@article{Rasgianti2026,
author = {Rasgianti, Rasgianti and Aprilana, Almas and Sulistiyowati, Desy and Kautsar, Hensa Akbar Al and Adiputra, Ristiyanto and Prabowo, Aditya Rio and Srinivasamurthy, Sharath},
title = {Numerical Study on the Bending Behavior of OTEC Cold Water Pipes Considering Geometric Imperfections},
journal = {Key Engineering Materials},
year = {2026},
volume = {1064},
pages = {59--64},
doi = {10.4028/p-tuhw62}
}
EUVIMED