EUVIMEDEUVIMED entdecken
Crossref

Metallographic and Fractographic Analysis of Plastic Deformation of Austenitic Stainless Steel AISI 304 after Static and Dynamic Loading

Veronika Chvalníková, Milan Uhríčik, Martin Slezák, Juraj Belan, Tomaš Vlach

Solid State Phenomena · 13.03.2026 · 386 · 99-105

DOI: 10.4028/p-tf60on ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 13.03.2026. Verfasst von Veronika Chvalníková und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 16 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a metallographic and fractographic study of AISI 304 austenitic stainless steel subjected to mechanical loading in the sensitized condition. Static three-point bending tests and impact tests were carried out to evaluate how sensitization affects the mechanical response and fracture behaviour of AISI 304. The study compares the initial state of the material with its condition after sensitization at 700 °C for 10 h, with emphasis on changes in plastic deformation and fracture mechanisms. Microstructural evaluation was performed using light microscopy, while Vickers microhardness measurements provided insight into local mechanical changes. Fractographic analysis using scanning electron microscopy revealed differences in fracture surface morphology. Results demonstrate a decrease in microhardness, reduced impact energy, and noticeable differences in fracture morphology following the sensitization treatment, indicating that the heat treatment influences both the mechanical response and failure behaviour of AISI 304.

Zitieren

APA

Chvalníková, V., Uhríčik, M., Slezák, M., Belan, J., & Vlach, T. (2026). Metallographic and Fractographic Analysis of Plastic Deformation of Austenitic Stainless Steel AISI 304 after Static and Dynamic Loading. Solid State Phenomena, 386, 99-105. https://doi.org/10.4028/p-tf60on

Vancouver

Chvalníková V, Uhríčik M, Slezák M, Belan J, Vlach T. Metallographic and Fractographic Analysis of Plastic Deformation of Austenitic Stainless Steel AISI 304 after Static and Dynamic Loading. Solid State Phenomena. 2026;386:99-105. doi:10.4028/p-tf60on

BibTeX
@article{Chvalnkov2026,
  author = {Chvalníková, Veronika and Uhríčik, Milan and Slezák, Martin and Belan, Juraj and Vlach, Tomaš},
  title = {Metallographic and Fractographic Analysis of Plastic Deformation of Austenitic Stainless Steel AISI 304 after Static and Dynamic Loading},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {386},
  pages = {99--105},
  doi = {10.4028/p-tf60on}
}
Kostenlos starten →