Determination of Gelation Zone Position in Reactive Thermoplastic Pultrusion by Analysis of Heating Power Consumption
Defect and Diffusion Forum · 17.04.2026 · 451 · 147-156
DOI: 10.4028/p-s43bos ↗Kurz gefasst
Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 17.04.2026. Verfasst von Michael Wilhelm und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Process speed in pultrusion is significantly influenced by the exothermic reactions of the matrix materials used. The main reaction zone (gel zone) is a key indicator to describe and interpret the reaction behavior in pultrusion. It can be easily observed by elevated temperatures in the die, particularly for highly exothermic thermoset matrices like vinyl ester, epoxy, and polyurethane. However, this effect is not as pronounced in reactive thermoplastics. The exothermic reactions contribute to a reduction in power consumption of the heating plates within the different heating zones, each with its individual temperature. Analyzing the power consumption of the individual heating zones across different process parameter settings allows to determine the position of the gel zone. This information is foundational for pultrusion process optimization, as it allows for more efficient utilization of the die length, ultimately increasing the pull speeds and enabling higher production rates. In this study, a comparative analysis of the power consumption across the heating zones was performed. To validate the findings obtained from the power measurements, thermocouples were drawn through the die at the same process parameters to accurately measure the temperature evolution within the pultruded profile throughout the die length.
Zitieren
APA
Wilhelm, M., Schelleis, C., Zeeb, G., & Henning, F. (2026). Determination of Gelation Zone Position in Reactive Thermoplastic Pultrusion by Analysis of Heating Power Consumption. Defect and Diffusion Forum, 451, 147-156. https://doi.org/10.4028/p-s43bos
Vancouver
Wilhelm M, Schelleis C, Zeeb G, Henning F. Determination of Gelation Zone Position in Reactive Thermoplastic Pultrusion by Analysis of Heating Power Consumption. Defect and Diffusion Forum. 2026;451:147-156. doi:10.4028/p-s43bos
BibTeX
@article{Wilhelm2026,
author = {Wilhelm, Michael and Schelleis, Christoph and Zeeb, Georg and Henning, Frank},
title = {Determination of Gelation Zone Position in Reactive Thermoplastic Pultrusion by Analysis of Heating Power Consumption},
journal = {Defect and Diffusion Forum},
year = {2026},
volume = {451},
pages = {147--156},
doi = {10.4028/p-s43bos}
}
EUVIMED