EUVIMEDEUVIMED entdecken
Crossref

Microstructural and Physico-Mechanical Properties of Stoneware Bodies Based on Local Clay and Quartz

Phiraya Pukpobsuk, Soravich Mulinta, Siwat Lawanwadeekul, Pincha Tolkidtikul

Key Engineering Materials · 30.11.2026 · 1066 · 59-65

DOI: 10.4028/p-r5oysg ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 30.11.2026. Verfasst von Phiraya Pukpobsuk und 3 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to characterize the properties of raw materials used in stoneware bodies in Lampang Province, Thailand. The raw materials used in the study came from local sources, including Lampang clay, Lampang pottery stone from Patra Ratana Clays and Minerals (1992) Company Limited, and Mae-Than ball clay from MRD-ECC (Thailand) Co., Ltd, and quartz from Sibelco Minerals (Thailand) Co., Ltd. The raw materials were characterized using a particle analyzer, X-ray fluorescence (XRF), and X-ray diffraction (XRD). The mixture ratio of the stoneware body was varied to 50-90% Mae-Than ball clay, 5-25% Lampang clay, 5-25% Lampang pottery stone, and 10-40% quartz, in 15 component ratios. After firing at 1200°C, the properties of the stoneware body were studied. The linear shrinkage, water absorption, bulk density, apparent porosity, crazing, and bending strength of the stoneware body were also tested. The results showed that the ratio of 70% Mae-Than ball clay, 10% Lampang clay, 10% Lampang pottery stone, and 10% quartz had a linear shrinkage of 10.77%, water absorption of 2.8%, bulk density of 1.89 g/cm 3 , appearance porosity of 7.5%, non-crazing, and mechanical properties of the resistance to bending of 578 kg/cm 2 . These properties comply with the requirements of the Thai Industrial Standard TIS-S-49-2019 for stoneware products. The findings demonstrated that Lampang clay can be utilized effectively to produce high-quality stoneware bodies, supporting the sustainable use of regional raw materials and the development of ceramic products for local and community-based industries.

Zitieren

APA

Pukpobsuk, P., Mulinta, S., Lawanwadeekul, S., & Tolkidtikul, P. (2026). Microstructural and Physico-Mechanical Properties of Stoneware Bodies Based on Local Clay and Quartz. Key Engineering Materials, 1066, 59-65. https://doi.org/10.4028/p-r5oysg

Vancouver

Pukpobsuk P, Mulinta S, Lawanwadeekul S, Tolkidtikul P. Microstructural and Physico-Mechanical Properties of Stoneware Bodies Based on Local Clay and Quartz. Key Engineering Materials. 2026;1066:59-65. doi:10.4028/p-r5oysg

BibTeX
@article{Pukpobsuk2026,
  author = {Pukpobsuk, Phiraya and Mulinta, Soravich and Lawanwadeekul, Siwat and Tolkidtikul, Pincha},
  title = {Microstructural and Physico-Mechanical Properties of Stoneware Bodies Based on Local Clay and Quartz},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1066},
  pages = {59--65},
  doi = {10.4028/p-r5oysg}
}
Kostenlos starten →