EUVIMEDEUVIMED entdecken
Crossref

Vibration Characteristics of a Laminated Composite Plate with a Surface-Bonded PZT Patch under Classical Boundary Conditions: A Finite Element Study

Dhruv Bagai, Abhishek Roy, Supen Kumar Sah, Narayan Sharma

Materials Science Forum · 01.06.2026 · 1194 · 53-66

DOI: 10.4028/p-mbp4ij ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 01.06.2026. Verfasst von Dhruv Bagai und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a finite element investigation of the vibration characteristics of a laminated carbon fiber reinforced polymer (CFRP) composite plate with a centrally surface-bonded piezoelectric (PZT-5H) patch under classical boundary conditions. A square CFRP plate of dimensions 300 × 300 × 3 mm with a [0/90/0/90] layup is analyzed with and without an active piezoelectric patch, considering clamped–clamped–clamped–clamped (CCCC), clamped–free–clamped–free (CFCF), clamped–free–free–free (CFFF), and simply supported–simply supported–simply supported–simply supported (SSSS) boundary conditions. Linear piezoelectric theory and steady-state harmonic excitation are employed using Abaqus/CAE 2025 Learning Edition. Modal characteristics are obtained from the first six natural frequencies, while harmonic response is evaluated in terms of peak out-of-plane displacement at the plate center under combined mechanical loading and open-loop electrical actuation. The results demonstrate that the presence of the PZT patch induces boundary-condition-dependent modifications in both natural frequencies and harmonic response amplitudes. For highly constrained configurations (CCCC and SSSS), the active PZT patch leads to a reduction in peak harmonic displacement, whereas for less constrained cases (CFCF and CFFF), a slight amplification of the response is observed. These findings highlight the strong coupling between structural boundary conditions and piezoelectric actuation effectiveness, and they establish a validated baseline for future investigations involving closed-loop control, multi-patch configurations, and data-driven optimization strategies.

Zitieren

APA

Bagai, D., Roy, A., Sah, S. K., & Sharma, N. (2026). Vibration Characteristics of a Laminated Composite Plate with a Surface-Bonded PZT Patch under Classical Boundary Conditions: A Finite Element Study. Materials Science Forum, 1194, 53-66. https://doi.org/10.4028/p-mbp4ij

Vancouver

Bagai D, Roy A, Sah SK, Sharma N. Vibration Characteristics of a Laminated Composite Plate with a Surface-Bonded PZT Patch under Classical Boundary Conditions: A Finite Element Study. Materials Science Forum. 2026;1194:53-66. doi:10.4028/p-mbp4ij

BibTeX
@article{Bagai2026,
  author = {Bagai, Dhruv and Roy, Abhishek and Sah, Supen Kumar and Sharma, Narayan},
  title = {Vibration Characteristics of a Laminated Composite Plate with a Surface-Bonded PZT Patch under Classical Boundary Conditions: A Finite Element Study},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1194},
  pages = {53--66},
  doi = {10.4028/p-mbp4ij}
}
Kostenlos starten →