Optimization of Micro-Drilling Parameters for Acoustic Panel Materials Using Taguchi Method
Key Engineering Materials · 04.05.2026 · 1053 · 45-55
DOI: 10.4028/p-le3wge ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 04.05.2026. Verfasst von Jong Yee Fang und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.
Abstract (Originalsprache)
This study investigates the micro-drilling parameters to minimize perforation error in biodegradable and composite materials: Oil Palm Fiberboard (OPF), Polylactic Acid (PLA), and Printed Circuit Board (PCB). Two biodegradable materials (OPF and PLA) were compared to a standard industrial PCB for benchmarking. Micro perforated hole is important in sound absorber to provide better absorption performance. A Taguchi L27 design of experiments was used to assess the effects of support presence, post-penetration spin time, and spindle speed on dimensional accuracy. For OPF, the lowest average error (0.031 mm) was achieved using no support, a 1 second spin time, and a spindle speed of 6,000 RPM, minimizing tool deflection in the fibrous structure. PLA showed the best result (0.344 mm error) with no support, no spin time, and a moderate spindle speed of 8000 RPM, reducing thermal distortion. For PCB, a layered and brittle material, a sandwiched support setup, no spin time, and a high spindle speed of 10,000 RPM achieved the lowest error (0.040 mm), reducing delamination and chipping. Although the exact optimal settings were not found in the experimental runs, very similar combinations yielded the best accuracy in each material. These findings validate the inferred trends and emphasize the importance of spin time and spindle speed over support. The results provide actionable guidelines for high-precision fabrication of eco-friendly acoustic absorbers, contributing to environmentally sustainable material processing and enhanced indoor acoustic control.
Zitieren
APA
Fang, J. Y., Ooi, L. E., Teoh, C. Y., & Chan, K. W. (2026). Optimization of Micro-Drilling Parameters for Acoustic Panel Materials Using Taguchi Method. Key Engineering Materials, 1053, 45-55. https://doi.org/10.4028/p-le3wge
Vancouver
Fang JY, Ooi LE, Teoh CY, Chan KW. Optimization of Micro-Drilling Parameters for Acoustic Panel Materials Using Taguchi Method. Key Engineering Materials. 2026;1053:45-55. doi:10.4028/p-le3wge
BibTeX
@article{Fang2026,
author = {Fang, Jong Yee and Ooi, Lu Ean and Teoh, Choe Yung and Chan, Keng Wai},
title = {Optimization of Micro-Drilling Parameters for Acoustic Panel Materials Using Taguchi Method},
journal = {Key Engineering Materials},
year = {2026},
volume = {1053},
pages = {45--55},
doi = {10.4028/p-le3wge}
}
EUVIMED