Transformation of Arsenic Compounds in Copper Smelting Dust under Mechanochemical Treatment with Sodium Sulfide
Key Engineering Materials · 24.11.2026 · 1065 · 121-126
DOI: 10.4028/p-kdq7k7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 24.11.2026. Verfasst von T. Osserov. Die Arbeit nennt 15 Literaturangaben.
Abstract (Originalsprache)
Arsenic-bearing copper smelting dust is a hazardous technogenic material that requires controlled pretreatment before further processing. In this work, the effect of mechanochemical activation in the “dust–” system on arsenic phase transformations was investigated. The dust was co-milled with at dust: mass ratios of 80:20 and 60:40 for 15 and 30 min in a planetary ball mill. The phase composition of the initial and treated samples was studied by X-ray diffraction, and the thermodynamic feasibility of arsenic sulfide formation was evaluated using the standard Gibbs free energy change. The initial dust consisted mainly of , , and , indicating that arsenic was predominantly present in the oxide form within a sulfate matrix. After mechanochemical treatment with , the formation of was detected, confirming arsenic sulfidization. In the 80:20 system, appeared after 15 min of treatment, while further milling decreased the contribution of . Increasing the content to 40 wt.% did not significantly enhance formation but promoted secondary sulfur-and sodium-containing phases. Thermodynamic calculations showed negative values for formation over 25–1000 °C. The results indicate that is an effective sulfidizing reagent for mechanochemical pretreatment of copper smelting dust, with the 80:20 composition providing a more controlled pathway for arsenic transformation.
Zitieren
APA
Osserov, T. (2026). Transformation of Arsenic Compounds in Copper Smelting Dust under Mechanochemical Treatment with Sodium Sulfide. Key Engineering Materials, 1065, 121-126. https://doi.org/10.4028/p-kdq7k7
Vancouver
Osserov T. Transformation of Arsenic Compounds in Copper Smelting Dust under Mechanochemical Treatment with Sodium Sulfide. Key Engineering Materials. 2026;1065:121-126. doi:10.4028/p-kdq7k7
BibTeX
@article{Osserov2026,
author = {Osserov, T.},
title = {Transformation of Arsenic Compounds in Copper Smelting Dust under Mechanochemical Treatment with Sodium Sulfide},
journal = {Key Engineering Materials},
year = {2026},
volume = {1065},
pages = {121--126},
doi = {10.4028/p-kdq7k7}
}
EUVIMED