EUVIMEDEUVIMED entdecken
Crossref

Mechanical and Microstructural Characterization of Diffusion-Bonded Copper-Nickel Joint Interface

Salman Khan, Zainab Ali, Khadija Khadija, Massab Junaid

Advanced Materials Research · 31.01.2024 · 1179 · 147-155

DOI: 10.4028/p-k8wuuo ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials Research, online erschienen am 31.01.2024. Verfasst von Salman Khan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 11 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid-state diffusion bonding effectively joins dissimilar materials, even with varying metallurgical properties and melting points. In this study, a Cu/Ni joint was produced at a bonding temperature of 950°C for 60 minutes under a vacuum. The microstructural and mechanical properties of the bonding interface were evaluated using scanning electron microscopy (SEM) equipped with energy-dispersive spectroscopy (EDS), microhardness tests, and X-ray diffraction (XRD). It was found that the EDS point scan analysis revealed the formation of a solid solution of Cu-Ni at the bonding interface. Since Cu-Ni exhibit complete solubility with each other, no intermetallic compounds (IMCs) were formed. The microhardness indicated that the bonding interface had a microhardness of 20% and 54% higher than the base metals (BM) of Ni and Cu, respectively.

Zitieren

APA

Khan, S., Ali, Z., Khadija, K., & Junaid, M. (2024). Mechanical and Microstructural Characterization of Diffusion-Bonded Copper-Nickel Joint Interface. Advanced Materials Research, 1179, 147-155. https://doi.org/10.4028/p-k8wuuo

Vancouver

Khan S, Ali Z, Khadija K, Junaid M. Mechanical and Microstructural Characterization of Diffusion-Bonded Copper-Nickel Joint Interface. Advanced Materials Research. 2024;1179:147-155. doi:10.4028/p-k8wuuo

BibTeX
@article{Khan2024,
  author = {Khan, Salman and Ali, Zainab and Khadija, Khadija and Junaid, Massab},
  title = {Mechanical and Microstructural Characterization of Diffusion-Bonded Copper-Nickel Joint Interface},
  journal = {Advanced Materials Research},
  year = {2024},
  volume = {1179},
  pages = {147--155},
  doi = {10.4028/p-k8wuuo}
}
Kostenlos starten →