EUVIMEDEUVIMED entdecken
Crossref

Future Challenges in Semiconductor Cleaning

Kuntack Lee, Ji Hoon Cha, Hayoung Jeon, Seok Heo, Younghoo Kim, Ji Hoon Jeong, Seungmin Shin, Sangean Park, Sunghyun Park, Hyo San Lee, Hunjae Jang

Solid State Phenomena · 29.10.2026 · 395 · 99-105

DOI: 10.4028/p-k0nfpd ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 29.10.2026. Verfasst von Kuntack Lee und 10 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wet etching had received more attention than pre-and post-cleaning from 1950s to 1970s. However, in the era after the 5um node, wet etching was replaced by dry etching due to its isotropic etching characteristics. Therefore, pre-and post-cleaning are considered a major part of cleaning except for several wet etching processes. However, in the current era of 3D structured devices such as VNAND, GAA, 3DDRAM, lateral wet etching is essential for the patterning of 3D devices, the proportion of wet etching in cleaning processes is increasing. Additionally, selective partial uniform recess technology is sometimes required instead of selective full strip, so local, top-bottom and in-wafer uniformity have become more important than ever. To achieve those requirements, longer time process and in wafer uniformity control hardware, such as nozzle sweep and heating chuck have been used. From time to time, we must control the selectivity between the same materials with different concentration, such as Si x Ge 1- x , to obtain the target shape; we must use more flexible, multi-step processes. Dry (gas phase) cleaning provides better flexibility than wet cleaning. Furthermore, dry (gas phase) cleaning gives us another chance for several materials that are not compatible with wet chemical cleaning, providing another domain of selectivity. Also, area selectivity become another challenge. We must etch without corner rounding or climbing, and we want to perform anisotropic etching. On the contrary, based on generic clean roadmap, high aspect ratio cleaning, and low consumption cleaning will be continuous challenges. Countermeasures for both challenges are also briefly discussed.

Zitieren

APA

Lee, K., Cha, J. H., Jeon, H., Heo, S., Kim, Y., Jeong, J. H., Shin, S., Park, S., Park, S., Lee, H. S., & Jang, H. (2026). Future Challenges in Semiconductor Cleaning. Solid State Phenomena, 395, 99-105. https://doi.org/10.4028/p-k0nfpd

Vancouver

Lee K, Cha JH, Jeon H, Heo S, Kim Y, Jeong JH, et al. Future Challenges in Semiconductor Cleaning. Solid State Phenomena. 2026;395:99-105. doi:10.4028/p-k0nfpd

BibTeX
@article{Lee2026,
  author = {Lee, Kuntack and Cha, Ji Hoon and Jeon, Hayoung and Heo, Seok and Kim, Younghoo and Jeong, Ji Hoon and Shin, Seungmin and Park, Sangean and Park, Sunghyun and Lee, Hyo San and Jang, Hunjae},
  title = {Future Challenges in Semiconductor Cleaning},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {395},
  pages = {99--105},
  doi = {10.4028/p-k0nfpd}
}
Kostenlos starten →