EUVIMEDEUVIMED entdecken
Crossref

Surface Microstructure Engineering of Carbon Black/Ecoflex Nanocomposite for Enhanced Piezoresistive Sensors Performance

Fatimah Khairiah Abd Hamid, Nor Diyana Md. Sin, Nur Amalina Muhamad, Mohamad Hafiz Mamat, Nurul Ezaila Alias, Zaharah Johari, Noor Dzulaikha Daud

Key Engineering Materials · 24.11.2026 · 1065 · 21-26

DOI: 10.4028/p-jv1vt8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 24.11.2026. Verfasst von Fatimah Khairiah Abd Hamid und 6 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible strain sensors based on piezoresistive mechanism have gained considerable interest in wearable devices, soft robotic system and electronic skin due to its advantages such as flexible and capability to detect mechanical deformation through electrical signal variation. Despite recent advances, developing sensors with reliable sensitivity, simple fabrication, and cost-effective processing remains a significant challenge. In this study, carbon black (CB)/Ecoflex composite sensors were fabricated using a 3D printing-assisted technique to investigate the influence of conductive filler concentration oand surface microstructure on sensor performance. CB was used as a low-coast conductive material to form electrical pathways within the flexible Ecoflex matrix, eliminating the requirement for additional chemical treatment. 4 sensor samples with different structural configurations were prepared using CB concentration of 4.6 wt % Carbon Black and 6.8 wt % Carbon Black. For the structural design, two types of structural configuration were used and known as normal and dot-patterned Ecoflex surfaces. The relationship between surface architecture, conductive network formation, and electromechanical response was systematically evaluated. The results demonstrated that the increasing CB concentration enhanced the formation of interconnected conductive network, contributing to lower resistance and improved electrical properties. When samples subjected to tensile strain, the relative resistance of all sensors increased due to deformation-induced changes within the conductive networks. The stretching process increased the distance between conductive particles, and altering resistance behaviour. Sensors with larger resistance variations exhibited higher strain sensitivity, while samples with stable conductive pathways showed improve electrical stability. The findings indicate that both conductive filler content and surface morphology area essential parameters for controlling piezoresistive sensor characteristics. This study provides a simple and effective fabrication strategy for developing flexible sensors with tunable performance for wearable and soft electronic application.

Zitieren

APA

Hamid, F. K. A., Sin, N. D. M., Muhamad, N. A., Mamat, M. H., Alias, N. E., Johari, Z., & Daud, N. D. (2026). Surface Microstructure Engineering of Carbon Black/Ecoflex Nanocomposite for Enhanced Piezoresistive Sensors Performance. Key Engineering Materials, 1065, 21-26. https://doi.org/10.4028/p-jv1vt8

Vancouver

Hamid FKA, Sin NDM, Muhamad NA, Mamat MH, Alias NE, Johari Z, et al. Surface Microstructure Engineering of Carbon Black/Ecoflex Nanocomposite for Enhanced Piezoresistive Sensors Performance. Key Engineering Materials. 2026;1065:21-26. doi:10.4028/p-jv1vt8

BibTeX
@article{Hamid2026,
  author = {Hamid, Fatimah Khairiah Abd and Sin, Nor Diyana Md. and Muhamad, Nur Amalina and Mamat, Mohamad Hafiz and Alias, Nurul Ezaila and Johari, Zaharah and Daud, Noor Dzulaikha},
  title = {Surface Microstructure Engineering of Carbon Black/Ecoflex Nanocomposite for Enhanced Piezoresistive Sensors Performance},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1065},
  pages = {21--26},
  doi = {10.4028/p-jv1vt8}
}
Kostenlos starten →