Forming Limit Test of Asymmetric Al-Polymer Laminate Composite Film
Solid State Phenomena · 15.04.2026 · 388 · 141-151
DOI: 10.4028/p-is64g3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 15.04.2026. Verfasst von Cheol Sagong und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 9 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
As environmental issues arise, increasing battery efficiency is emerging as an important task. To manufacture more efficient lithium-ion batteries, the industry is striving to increase the depth of battery cell. A growing number of companies are focusing on developing pouch-type batteries using materials with high formability. To produce the battery cell with bigger depth, understanding of the formability of the material is important. Forming limit test can be considered. The material used in pouch-type batteries is an asymmetric aluminum-polymer laminate composite, which is consisted of four layers: polypropylene, aluminum, nylon, and PET. Because of good formability of polymer layers, forming limit curve cannot be obtained using typical forming limit test such as experiment using Nakazima specimen. Therefore, the modified Marciniak testing method is implemented for this research, which is helpful for making strain concentration in the middle of the specimen. In the modified Marciniak test, a dummy sheet is layered between the specimen and punch, to prevent the fracture around the region contacting with the fillet of the punch. In this research, different kinds of polymers were tried as the dummy sheet material. In addition, specimens of various designs were tested and the forming limit test result of Al-Polymer film with thickness of 153\mu m was converted using Polar Effective Plastic Strain (PEPS) approach.
Zitieren
APA
Sagong, C., Jang, T. J., Ahn, T., & Yoon, J. W. (2026). Forming Limit Test of Asymmetric Al-Polymer Laminate Composite Film. Solid State Phenomena, 388, 141-151. https://doi.org/10.4028/p-is64g3
Vancouver
Sagong C, Jang TJ, Ahn T, Yoon JW. Forming Limit Test of Asymmetric Al-Polymer Laminate Composite Film. Solid State Phenomena. 2026;388:141-151. doi:10.4028/p-is64g3
BibTeX
@article{Sagong2026,
author = {Sagong, Cheol and Jang, Taek Jin and Ahn, Taegyun and Yoon, Jeong Whan},
title = {Forming Limit Test of Asymmetric Al-Polymer Laminate Composite Film},
journal = {Solid State Phenomena},
year = {2026},
volume = {388},
pages = {141--151},
doi = {10.4028/p-is64g3}
}
EUVIMED