Evaluation of Oxide Processing Steps in SiC Technology Using Contactless Corona-Based CV Measurements
Materials Science Forum · 19.05.2026 · 1191 · 29-35
DOI: 10.4028/p-ipd033 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 19.05.2026. Verfasst von Robin Karhu und 4 weiteren Autor:innen. Die Arbeit nennt 5 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
An area of increasing interest for SiC device processing is the processing and qualification of silicon oxides. In this article a contactless corona CV (CnCV) measurement procedure is evaluated as a way to gain more knowledge about the different processes related to oxides. A 21-point measurement pattern is used to gain information about uniformity of oxide properties. Two different types of oxides have been considered, low pressure chemical vapor deposited (CVD) oxides using tetraethylorthosilicate (TEOS) and thermally grown oxides. The two different groups have received different combinations of pre- and post-processing steps prior to measurements. As expected, low pressure CVD (LPCVD) and thermally grown SiO 2 without any post oxidation annealing (POA) showed significantly different electrical characteristics compared to the wafers that did get a POA. This difference could clearly be distinguished by CnCV, meaning that individual process steps can be analyzed without the fabrication of any test structures on the wafers. As the individual process steps can be analyzed, the uniformity of the individual steps can be accessed. Using a 21-point pattern it was possible to show that there is a non-uniformity in the LPCVD process used prior to the POA. This makes the CnCV technique suitable for in-line characterization and process monitoring.
Zitieren
APA
Karhu, R., Häublein, V., Wilson, M., Rommel, M., & Kallinger, B. (2026). Evaluation of Oxide Processing Steps in SiC Technology Using Contactless Corona-Based CV Measurements. Materials Science Forum, 1191, 29-35. https://doi.org/10.4028/p-ipd033
Vancouver
Karhu R, Häublein V, Wilson M, Rommel M, Kallinger B. Evaluation of Oxide Processing Steps in SiC Technology Using Contactless Corona-Based CV Measurements. Materials Science Forum. 2026;1191:29-35. doi:10.4028/p-ipd033
BibTeX
@article{Karhu2026,
author = {Karhu, Robin and Häublein, Volker and Wilson, Marshall and Rommel, Mathias and Kallinger, Birgit},
title = {Evaluation of Oxide Processing Steps in SiC Technology Using Contactless Corona-Based CV Measurements},
journal = {Materials Science Forum},
year = {2026},
volume = {1191},
pages = {29--35},
doi = {10.4028/p-ipd033}
}
EUVIMED