Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions
Solid State Phenomena · 23.11.2026 · 396 · 147-152
DOI: 10.4028/p-im3j6o ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 23.11.2026. Verfasst von Thammasak Chetawan und 3 weiteren Autor:innen. Die Arbeit nennt 9 Literaturangaben.
Abstract (Originalsprache)
Porcelain insulators used in 22 kV distribution networks can experience performance degradation under wet polluted conditions due to increased surface conduction and concentrated electrical stress. This study numerically evaluates TiO 2 –ZrO 2 -modified glaze formulations for a Type 57-2 porcelain line-post insulator using the finite-element method. The ZrO 2 content was fixed, while the TiO 2 content was varied by partially replacing conventional glaze constituents. The effective relative permittivity was estimated through weight-to-volume fraction conversion and a multicomponent Maxwell-Garnett model. The polluted surface was represented by a conductive surface boundary condition with an equivalent conductivity derived from an ESC-based conversion. Compared with the conventional glaze, the modified formulations produced smoother potential grading and lower peak electric-field intensity. The peak electric field was reduced by 10.5%, 10.7%, 11.3%, and 11.9% for Cases 2–5, respectively. Case 5, containing 30 wt% TiO₂ and 20 wt% ZrO₂, provided the greatest field reduction. Because the same equivalent surface conductivity was applied to all cases, the reduced local electric field suggests a lower local current-density tendency along the polluted surface. Flashover, dry-band formation, and total leakage current were not directly simulated; therefore, the results are interpreted as comparative electrical-stress indicators. The proposed framework provides an efficient preliminary tool for selecting promising glaze formulations before experimental validation.
Zitieren
APA
Chetawan, T., Chunlanin, P., Tanusilp, S. A., & Tonmitr, N. (2026). Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions. Solid State Phenomena, 396, 147-152. https://doi.org/10.4028/p-im3j6o
Vancouver
Chetawan T, Chunlanin P, Tanusilp SA, Tonmitr N. Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions. Solid State Phenomena. 2026;396:147-152. doi:10.4028/p-im3j6o
BibTeX
@article{Chetawan2026,
author = {Chetawan, Thammasak and Chunlanin, Peeranat and Tanusilp, Sora At and Tonmitr, Norrawit},
title = {Finite Element Analysis of TiO2–ZrO2 Modified Glazes for Porcelain Insulators under Wet Polluted Conditions},
journal = {Solid State Phenomena},
year = {2026},
volume = {396},
pages = {147--152},
doi = {10.4028/p-im3j6o}
}
EUVIMED