Effect of Deposition Strategy on Geometric Stability in Wire Arc Additive Manufacturing of Inconel 625
Key Engineering Materials · 13.04.2026 · 1047 · 183-190
DOI: 10.4028/p-iarz2d ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.04.2026. Verfasst von Eleonora Viola und 2 weiteren Autor:innen. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Wire Arc Additive Manufacturing (WAAM) is a promising technology for producing large, high-performance metallic components, though process stability and geometric control remain critical challenges. The present work investigates the influence of deposition trajectory on the geometry, surface quality, and microhardness of wire arc additive manufactured Inconel 625 walls, produced by a Cold Metal Transfer (CMT) process. A conventional linear double-pass strategy is directly compared with a single-pass triangular weave trajectory under equivalent heat input per unit length, in order to isolate the effect of the torch path from other process variables. Single-layer and multi-layer walls were fabricated and characterized in terms of geometry, dimensional stability, surface waviness, and Vickers microhardness. The results show that the weave trajectory leads to improved geometric consistency, reduced variability, and significantly lower surface waviness compared to the linear strategy, while maintaining comparable mean wall width and microhardness. These findings demonstrate that appropriate trajectory design can enhance geometric stability and near-net-shape capability in WAAM-CMT without altering thermal input or material properties.
Zitieren
APA
Viola, E., Silvestri, A. T., & Squillace, A. (2026). Effect of Deposition Strategy on Geometric Stability in Wire Arc Additive Manufacturing of Inconel 625. Key Engineering Materials, 1047, 183-190. https://doi.org/10.4028/p-iarz2d
Vancouver
Viola E, Silvestri AT, Squillace A. Effect of Deposition Strategy on Geometric Stability in Wire Arc Additive Manufacturing of Inconel 625. Key Engineering Materials. 2026;1047:183-190. doi:10.4028/p-iarz2d
BibTeX
@article{Viola2026,
author = {Viola, Eleonora and Silvestri, Alessia Teresa and Squillace, Antonino},
title = {Effect of Deposition Strategy on Geometric Stability in Wire Arc Additive Manufacturing of Inconel 625},
journal = {Key Engineering Materials},
year = {2026},
volume = {1047},
pages = {183--190},
doi = {10.4028/p-iarz2d}
}
EUVIMED