Formability Test for Characterizing the Mode II–III Fracture Transition
Solid State Phenomena · 15.04.2026 · 388 · 171-178
DOI: 10.4028/p-hp3vb8 ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 15.04.2026. Verfasst von Inês M. Almeida und 3 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The transition between different shear fracture modes is still not well understood, especially in the case of mode II to mode III fracture. While transitions involving mode I have been investigated in previous studies, the interaction between in-plane and out-of-plane shear fracture remains largely unexplored. This work presents an ongoing study aimed at analysing this transition through a newly proposed formability test based on the compression of a thick sheet. The test is intended to investigate the transition region between the shear fracture forming limit (SFFL) and the out-of-plane shear fracture forming limit (OSFFL), associated with fracture mechanics modes II and III, respectively. A new specimen geometry was developed by combining features of existing configurations designed to activate each fracture mode separately. Finite element simulations were carried out to support the design of the specimen and to provide an initial analysis of the strain loading paths in the ligament region. Preliminary numerical results indicate that the proposed test can promote in-plane shear, out-of-plane shear, as well as mixed fracture mechanisms. The predicted fracture initiation sites and corresponding strain paths were examined in the effective strain–stress triaxiality space to provide initial insight into the role of stress state on fracture behaviour. The influence of notch orientation on the resulting fracture mode is discussed, highlighting the potential of the proposed approach for studying mixed shear fracture conditions.
Zitieren
APA
Almeida, I. M., Magrinho, J. P., Martins, P. A., & Silva, M. B. (2026). Formability Test for Characterizing the Mode II–III Fracture Transition. Solid State Phenomena, 388, 171-178. https://doi.org/10.4028/p-hp3vb8
Vancouver
Almeida IM, Magrinho JP, Martins PA, Silva MB. Formability Test for Characterizing the Mode II–III Fracture Transition. Solid State Phenomena. 2026;388:171-178. doi:10.4028/p-hp3vb8
BibTeX
@article{Almeida2026,
author = {Almeida, Inês M. and Magrinho, João P.G. and Martins, Paulo A.F. and Silva, Maria Beatriz},
title = {Formability Test for Characterizing the Mode II–III Fracture Transition},
journal = {Solid State Phenomena},
year = {2026},
volume = {388},
pages = {171--178},
doi = {10.4028/p-hp3vb8}
}
EUVIMED