EUVIMEDEUVIMED entdecken
Crossref

Experimental Validation of EMIS-Based Frequency Tracking for Milling Vibration Monitoring Compared with FFT Analysis

Gökhan Haydarlar, Mehmet Alper Sofuoğlu, Mesut Tekkalmaz

Advanced Engineering Forum · 24.06.2026 · 59 · 23-32

DOI: 10.4028/p-h0ti45 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Engineering Forum, online erschienen am 24.06.2026. Verfasst von Gökhan Haydarlar und 2 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Effective suppression of vibration is essential for surface quality and tool longevity in machining. This study assesses the viability of Electromechanical Impedance Spectroscopy (EMIS)-based structural health monitoring as a compact alternative to microphone-assisted Fast Fourier Transform (FFT) analysis during the milling of Al-7075-T6. Experiments were conducted with a constant axial depth of cut of 0.5 mm while feed rate (50–70 mm/min) and spindle speed (1200–4300 rpm) were varied. A surface-bonded piezoelectric sensor recorded impedance signatures simultaneously with acoustic data. Dominant modes detected by EMIS lay between 90 Hz and 1.5 kHz and coincided with FFT peaks. The discrepancy between the two methods remained within 1.54–10.78%. The close agreement indicates that a single EMIS sensor can provide reliable, operator-independent vibration diagnostics without the extensive signal-conditioning infrastructure required by microphones. EMIS offers a pathway for real-time, closed-loop vibration control in milling applications.

Zitieren

APA

Haydarlar, G., Sofuoğlu, M. A., & Tekkalmaz, M. (2026). Experimental Validation of EMIS-Based Frequency Tracking for Milling Vibration Monitoring Compared with FFT Analysis. Advanced Engineering Forum, 59, 23-32. https://doi.org/10.4028/p-h0ti45

Vancouver

Haydarlar G, Sofuoğlu MA, Tekkalmaz M. Experimental Validation of EMIS-Based Frequency Tracking for Milling Vibration Monitoring Compared with FFT Analysis. Advanced Engineering Forum. 2026;59:23-32. doi:10.4028/p-h0ti45

BibTeX
@article{Haydarlar2026,
  author = {Haydarlar, Gökhan and Sofuoğlu, Mehmet Alper and Tekkalmaz, Mesut},
  title = {Experimental Validation of EMIS-Based Frequency Tracking for Milling Vibration Monitoring Compared with FFT Analysis},
  journal = {Advanced Engineering Forum},
  year = {2026},
  volume = {59},
  pages = {23--32},
  doi = {10.4028/p-h0ti45}
}
Kostenlos starten →