EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Numerical Analysis of Defect-Induced Stress and Deformation in a Progressive Cavity Pump Stator Elastomer

Dwi Meilianto, Rachmat Sriwijaya

Engineering Innovations · 11.06.2026 · 19 · 83-100

DOI: 10.4028/p-ff5d0j ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Innovations, online erschienen am 11.06.2026. Verfasst von Dwi Meilianto und 1 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Progressive Cavity Pumps (PCPs) depend on elastomeric stators to achieve effective sealing and mechanical durability. However, manufacturing imperfections and operational wear can introduce surface discontinuities that modify rotor–stator contact conditions and generate stress concentrations. This study presents a three-dimensional finite element analysis to investigate defect-induced stress and deformation in a PCP stator elastomer. The stator is modeled as nitrile butadiene rubber (NBR) using a third-order Ogden hyperelastic formulation derived from experimental tensile testing, while frictional contact between the rotor and stator is incorporated to represent realistic operating conditions. Circumferential rectangular grooves of varying depths and multiple rotor–stator interference levels are systematically examined. The results demonstrate that increasing rotor–stator interference significantly elevates the maximum von Mises stress, maximum principal strain, strain energy density, and overall stator deformation. In contrast, increasing defect depth modifies the stress distribution and slightly increases structural compliance, leading to a reduction in peak notch-tip stress due to stress redistribution within the elastomer. Pronounced stress concentration is observed at the defect edges, particularly at the notch tip, which may represent potential crack initiation regions under cyclic loading. These findings clarify the combined influence of interference and geometric discontinuities on stator mechanical response and provide insights for improving defect-tolerant design and reliability of PCP stator elastomers.

Zitieren

APA

Meilianto, D., & Sriwijaya, R. (2026). Numerical Analysis of Defect-Induced Stress and Deformation in a Progressive Cavity Pump Stator Elastomer. Engineering Innovations, 19, 83-100. https://doi.org/10.4028/p-ff5d0j

Vancouver

Meilianto D, Sriwijaya R. Numerical Analysis of Defect-Induced Stress and Deformation in a Progressive Cavity Pump Stator Elastomer. Engineering Innovations. 2026;19:83-100. doi:10.4028/p-ff5d0j

BibTeX
@article{Meilianto2026,
  author = {Meilianto, Dwi and Sriwijaya, Rachmat},
  title = {Numerical Analysis of Defect-Induced Stress and Deformation in a Progressive Cavity Pump Stator Elastomer},
  journal = {Engineering Innovations},
  year = {2026},
  volume = {19},
  pages = {83--100},
  doi = {10.4028/p-ff5d0j}
}
Kostenlos starten →