Optimizing Seismic Performance in Steel Beam-Column Connections: The Contribution of Cover Plates in RBS Configurations
Key Engineering Materials · 04.05.2026 · 1053 · 141-149
DOI: 10.4028/p-f8rppb ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 04.05.2026. Verfasst von Cintantya Budi Casita und 6 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben.
Abstract (Originalsprache)
This study presents a comparative evaluation of four steel beam-to-column connection configurations—Conventional (CONV), Cover Plate (CP), Reduced Beam Section (RBS), and a hybrid Reduced Beam Section with Cover Plate (RBSCP)—under cyclic loading conditions, with particular emphasis on hysteresis behavior and energy dissipation capacity. Finite element simulations were performed up to 6% story drift to evaluate each model’s performance against the seismic demand limits prescribed in ASCE/SEI 41-17. All configurations demonstrated adequate ductility for moderate to severe seismic events. The CONV model underperformed in both energy dissipation and stiffness retention, producing narrower hysteresis loops and exhibiting earlier stiffness degradation. In contrast, the CP connection achieved the highest energy dissipation and moment strength at all drift levels, attributed to the increased flange stiffness from the cover plates. The RBS model exhibited stable, well-balanced hysteresis loops with slightly lower strength but effective energy dissipation, benefiting from the intentional relocation of the plastic hinge away from the column face. The RBSCP connection combined the advantages of strength and ductility, sustaining broad and stable hysteresis loops with minor asymmetry between the positive and negative directions. Although it did not surpass CP in peak strength, RBSCP offered a well-balanced seismic performance. Envelope curve analysis revealed distinct differences in stiffness and degradation patterns. These findings highlight the potential of hybrid configurations such as RBSCP, with further geometric optimization recommended to enhance consistency and reliability.
Zitieren
APA
Casita, C. B., Suswanto, B., Iranata, D., Amalia, A. R., Matsumura, M., Watanabe, S., & Kombate, T. J. D. L. C. (2026). Optimizing Seismic Performance in Steel Beam-Column Connections: The Contribution of Cover Plates in RBS Configurations. Key Engineering Materials, 1053, 141-149. https://doi.org/10.4028/p-f8rppb
Vancouver
Casita CB, Suswanto B, Iranata D, Amalia AR, Matsumura M, Watanabe S, et al. Optimizing Seismic Performance in Steel Beam-Column Connections: The Contribution of Cover Plates in RBS Configurations. Key Engineering Materials. 2026;1053:141-149. doi:10.4028/p-f8rppb
BibTeX
@article{Casita2026,
author = {Casita, Cintantya Budi and Suswanto, Budi and Iranata, Data and Amalia, Aniendhita Rizki and Matsumura, Masahide and Watanabe, Shinya and Kombate, Tchabremane Jean De La Croix},
title = {Optimizing Seismic Performance in Steel Beam-Column Connections: The Contribution of Cover Plates in RBS Configurations},
journal = {Key Engineering Materials},
year = {2026},
volume = {1053},
pages = {141--149},
doi = {10.4028/p-f8rppb}
}
EUVIMED