EUVIMEDEUVIMED entdecken
Crossref

Strain-Rate-Dependent Deformation and Recovery of a Nylon Octet Metamaterial at Room Temperature

Mwema Fredrick Madaraka, Ndivhuwo Ndou

Key Engineering Materials · 30.11.2026 · 1066 · 33-43

DOI: 10.4028/p-es3ycz ↗

Kurz gefasst

Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 30.11.2026. Verfasst von Mwema Fredrick Madaraka und 1 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the importance of strain rate on the performance of octet lattice metamaterials in applications such as energy absorption systems, lightweight structural components, shape memory structures, and impact protection, there are limited studies on the influence of strain rate on the deformation of such structures. This study presents, for the first time, an investigation of the strain-rate-dependent mechanical behavior, deformation mechanisms, energy absorption, and recovery characteristics of additively manufactured octet lattice metamaterials with aspect ratios of 0.23 and 0.25 under in-plane uniaxial compression. The stress-strain response reveals that the 0.23 structure exhibits a non-monotonic trend, with reduced plateau and peak stresses at intermediate strain rates followed by strain-rate stiffening at higher strain rates, whereas the 0.25 structure consistently shows reduced stress with increasing strain rate. The deformation sequence highlights distinct behavior, with the 0.23 samples displaying irregular plateau regions and indistinct densification onset, while the 0.25 samples exhibit a stable plateau and well-defined densification, which becomes clearer with increasing strain rates. Correspondingly, the onset of densification follows a non-monotonic relationship with strain rates for the 0.23 structure but decreases monotonically for the 0.25 structure, indicating earlier collapse at higher strain rates. The specific energy absorption (SEA) reflects these trends, showing enhanced performance at higher strain rates for the 0.23 structure and gradual reduction for the 0.25 structure. Post-deformation analysis reveals that failure initiates at nodal regions. The 0.23 structure is dominated by localized buckling and strut stretching, while the 0.25 structure exhibits a more uniform, bending-driven collapse. However, the identified mechanisms represent experimentally observed and inferred deformation characteristics, rather than definitive mechanistic classifications. Recovery behavior for the two structures is affected by the strain rate.

Zitieren

APA

Madaraka, M. F., & Ndou, N. (2026). Strain-Rate-Dependent Deformation and Recovery of a Nylon Octet Metamaterial at Room Temperature. Key Engineering Materials, 1066, 33-43. https://doi.org/10.4028/p-es3ycz

Vancouver

Madaraka MF, Ndou N. Strain-Rate-Dependent Deformation and Recovery of a Nylon Octet Metamaterial at Room Temperature. Key Engineering Materials. 2026;1066:33-43. doi:10.4028/p-es3ycz

BibTeX
@article{Madaraka2026,
  author = {Madaraka, Mwema Fredrick and Ndou, Ndivhuwo},
  title = {Strain-Rate-Dependent Deformation and Recovery of a Nylon Octet Metamaterial at Room Temperature},
  journal = {Key Engineering Materials},
  year = {2026},
  volume = {1066},
  pages = {33--43},
  doi = {10.4028/p-es3ycz}
}
Kostenlos starten →