EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study on the Effects of Grain Shape, Size and Size Distribution on the Mechanical Behavior of Metals

Ruxandra Bocan, Emin Semih Perdahcioglu, Ton van den Boogard

Solid State Phenomena · 17.04.2026 · 390 · 163-172

DOI: 10.4028/p-cnir4v ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 17.04.2026. Verfasst von Ruxandra Bocan und 2 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Crystal plasticity finite element (CPFE) simulations of three-dimensional representative volume elements (RVEs) enable the prediction of polycrystalline material behavior under complex loading conditions. Plastic deformation is modeled through crystallographic slip on lattice slip systems, subject to the Schmid yield criterion based on the maximum resolved shear stress (CRSS). In this work, an efficient rate-independent crystal plasticity (CP) and gradient enhanced crystal plasticity (GECP) formulation is used to investigate the influence of microstructural characteristics on the mechanical performance of FCC materials. Three-dimensional periodic RVEs with irregular grain morphologies are simulated within Abaqus/Standard to study the effects of grain size, grain size distribution, and grain shape under uniaxial loading. Comparative analyses between the CP and GECP frameworks are performed to assess the predictive capabilities and applicability for increasingly heterogeneous microstructures. The results demonstrate that GECP accurately captures grain size dependent work hardening and grain size distribution effects through the intrinsic length scale introduced by strain gradient calculations. In contrast, grain shape variations result in only minor changes in the macroscopic response for both frameworks.

Zitieren

APA

Bocan, R., Perdahcioglu, E. S., & Boogard, T. V. D. (2026). Study on the Effects of Grain Shape, Size and Size Distribution on the Mechanical Behavior of Metals. Solid State Phenomena, 390, 163-172. https://doi.org/10.4028/p-cnir4v

Vancouver

Bocan R, Perdahcioglu ES, Boogard TVD. Study on the Effects of Grain Shape, Size and Size Distribution on the Mechanical Behavior of Metals. Solid State Phenomena. 2026;390:163-172. doi:10.4028/p-cnir4v

BibTeX
@article{Bocan2026,
  author = {Bocan, Ruxandra and Perdahcioglu, Emin Semih and Boogard, Ton van den},
  title = {Study on the Effects of Grain Shape, Size and Size Distribution on the Mechanical Behavior of Metals},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {390},
  pages = {163--172},
  doi = {10.4028/p-cnir4v}
}
Kostenlos starten →