EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-Steels

Laura Witzmann, Florian Riedlsperger, Josef Mergl, Gerold Zuderstorfer, Bernhard Krenmayr, Bernhard Sonderegger

Materials Science Forum · 29.11.2023 · 1105 · 159-165

DOI: 10.4028/p-c6bebf ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 29.11.2023. Verfasst von Laura Witzmann und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work deals with the prediction of time-to-rupture (TTR) diagrams of martensitic 9-12% Cr steels. Martensitic 9-12% Cr steels are state of the art materials for powerplants due to their high creep strength and oxidation resistance. Since the experimental determination of TTR diagrams is costly and time-expensive (minimum 10 years), it is of particular interest to be able to model TTR diagrams and gradually replace experiments. Here, we approach the question to what extent we can generate a TTR diagram of a material out of a fraction of experimental results plus detailed understanding of the underlying microstructural/physical phenomena during creep. Our model is based on dislocation creep and includes multiple interactions between the microstructural constituents. We show the applicability of our approach by reproducing a TTR diagram of the well-known material P92. Input parameters are basic material data from literature, the starting microstructure before creep, chemical composition, some model parameters determined on the similar material P91, and one single creep curve of P92. The precipitate evolution is simulated by the software MatCalc, the other microstructural constituents (dislocation densities, subgrain boundaries etc.) by our creep model. By varying the stress between individual creep simulations whilst keeping all input parameters (starting microstructure, temperature and material parameters) constant, we produce multiple creep curves and thus generate the complete dataset for a TTR diagram. The model is of particular interest when it comes to the development of new materials, as the application range of these materials can be estimated quickly and with good reproducibility.

Zitieren

APA

Witzmann, L., Riedlsperger, F., Mergl, J., Zuderstorfer, G., Krenmayr, B., & Sonderegger, B. (2023). Prediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-Steels. Materials Science Forum, 1105, 159-165. https://doi.org/10.4028/p-c6bebf

Vancouver

Witzmann L, Riedlsperger F, Mergl J, Zuderstorfer G, Krenmayr B, Sonderegger B. Prediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-Steels. Materials Science Forum. 2023;1105:159-165. doi:10.4028/p-c6bebf

BibTeX
@article{Witzmann2023,
  author = {Witzmann, Laura and Riedlsperger, Florian and Mergl, Josef and Zuderstorfer, Gerold and Krenmayr, Bernhard and Sonderegger, Bernhard},
  title = {Prediction of TTR Diagrams via Physically Based Creep Simulations of Martensitic 9-12% Cr-Steels},
  journal = {Materials Science Forum},
  year = {2023},
  volume = {1105},
  pages = {159--165},
  doi = {10.4028/p-c6bebf}
}
Kostenlos starten →