Power Cycle Failure Modes of 10 kV SiC-MOSFET Power Modules with Different Wire Bond Layouts
Key Engineering Materials · 18.05.2026 · 1054 · 135-142
DOI: 10.4028/p-be7jb4 ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 18.05.2026. Verfasst von Masaki Takahashi und 3 weiteren Autor:innen. Die Arbeit nennt 1 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
10 kVSiC-MOSFETpowermodulesarebeingdevelopedformedium-voltageapplications, but their reliability has not yet been fully verified. This study demonstrates the power cycle test (PCT) on 10 kV SiC-MOSFET power modules with different wire bond layout designs to investigate the influence on their failure points. The 10 kV SiC-MOSFET is 8.1 mm square in size and 20 A/die. Only four source wire bonds are needed, which provides enough flexibility for the wire bond layout. The wire bonds are placed on the edge of each source pad to reduce the wire heating ∆ T wire by 6.2% compared to the conventional central wire bond placement from the 3D simulation. These differences were verified in the PCT on ∆ T diemax : 104−108 °C. As a result, itwas observed that samples with the modified layout, which achieved a lower ∆ T wire , exhibited a shift in failure mode from wire lift-off to solder failure, while maintaining a similar lifetime under higher die temperatures.
Zitieren
APA
Takahashi, M., Sun, Z. C., Munk-Nielsen, S., & Jørgensen, A. B. (2026). Power Cycle Failure Modes of 10 kV SiC-MOSFET Power Modules with Different Wire Bond Layouts. Key Engineering Materials, 1054, 135-142. https://doi.org/10.4028/p-be7jb4
Vancouver
Takahashi M, Sun ZC, Munk-Nielsen S, Jørgensen AB. Power Cycle Failure Modes of 10 kV SiC-MOSFET Power Modules with Different Wire Bond Layouts. Key Engineering Materials. 2026;1054:135-142. doi:10.4028/p-be7jb4
BibTeX
@article{Takahashi2026,
author = {Takahashi, Masaki and Sun, Zhong Chao and Munk-Nielsen, Stig and Jørgensen, Asger Bjørn},
title = {Power Cycle Failure Modes of 10 kV SiC-MOSFET Power Modules with Different Wire Bond Layouts},
journal = {Key Engineering Materials},
year = {2026},
volume = {1054},
pages = {135--142},
doi = {10.4028/p-be7jb4}
}
EUVIMED