Justification of the Manufacturing Plywood Technology on Dry Glues
Key Engineering Materials · 25.08.2023 · 953 · 33-41
DOI: 10.4028/p-b9ku9k ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 25.08.2023. Verfasst von Serhii Mazurchuk und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben.
Abstract (Originalsprache)
The use of environmentally safe technologies in the plywood production encourages the use of dry powder mixtures of polyester resin used for gluing veneer. The work presents the results of studies of some characteristics for plywood, which was product on the basis of polyester resin. As a result of experimental studies, the expediency of manufacturing plywood on dry adhesive mixtures of polyester resins has been substantiated. Since the limit of static bending strength along the fibers of the plywood face layers exceeds the standard value. The resistance to chipping on the glued layer of plywood also did not decrease and exceeds the standard value both after dry exposure and after soaking. The studied plywood is characterized by reduced moisture absorption properties. This is due to the thermal modification of the veneer. It was established that with an increase in the modification temperature to , moisture absorption decreases by more than 3.5 %. Thus, the obtained research results allow us to purposefully solve further problems related to the creation of new technologies for the wood products manufacture and to determine the conditions of their operation at various facilities.
Zitieren
APA
Mazurchuk, S., Tsapko, Y., Horbachova, O., & Tsapko, O. (2023). Justification of the Manufacturing Plywood Technology on Dry Glues. Key Engineering Materials, 953, 33-41. https://doi.org/10.4028/p-b9ku9k
Vancouver
Mazurchuk S, Tsapko Y, Horbachova O, Tsapko O. Justification of the Manufacturing Plywood Technology on Dry Glues. Key Engineering Materials. 2023;953:33-41. doi:10.4028/p-b9ku9k
BibTeX
@article{Mazurchuk2023,
author = {Mazurchuk, Serhii and Tsapko, Yuriy and Horbachova, Oleksandra and Tsapko, Oleksii},
title = {Justification of the Manufacturing Plywood Technology on Dry Glues},
journal = {Key Engineering Materials},
year = {2023},
volume = {953},
pages = {33--41},
doi = {10.4028/p-b9ku9k}
}
EUVIMED