EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cost-Effective One-Shot Stamping of Steel-Based High-Performance Lightweight Multi-Material Structures

Hao Wu, Mohamed Mohamed, Chunyi Gao, Zerong Ding, Manikandan Ganapathy, Pinaki Biswas, Rahul K. Verma, Ambrose Taylor, Nan Li

Solid State Phenomena · 14.04.2026 · 387 · 95-101

DOI: 10.4028/p-b5pfph ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 14.04.2026. Verfasst von Hao Wu und 8 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To address the challenges met in the manufacturing of state-of-the-art multi-material structures, this work employs a novel one-shot stamping process with single-stamp forming of advanced high-strength steels (AHSS)-based multi-material structures consisting of dual-phase steel (DP780) and low-cost glass fibre-reinforced polyamide 6 (GF/PA6). The effects of DP780 surface treatment and forming temperature on interfacial bonding with GF/PA6 were first assessed using double cantilever beam (DCB) tests, alongside tensile tests of DP780 to assess post-stamping performance. Sandblasting on DP780 significantly improved bonding strength compared to non-treated surface, while the interfacial fracture energy ( G C ) increased with forming temperature up to 350 °C before decreasing at higher temperatures, which is attributed to PA6 squeeze-out and DP780 surface oxidation. Although the tensile strength for DP780 decreased with increasing temperature, the yield strength peaked at 350 °C, identifying sandblasting and a forming temperature of 350 °C as the optimal processing conditions for DP780. Based on the optimal conditions determined, high-quality U-shaped demonstrator components were successfully produced with good surface finish, minimal polymer squeeze-out, and no observable defects, via further optimisation of the forming conditions.

Zitieren

APA

Wu, H., Mohamed, M., Gao, C., Ding, Z., Ganapathy, M., Biswas, P., Verma, R. K., Taylor, A., & Li, N. (2026). Cost-Effective One-Shot Stamping of Steel-Based High-Performance Lightweight Multi-Material Structures. Solid State Phenomena, 387, 95-101. https://doi.org/10.4028/p-b5pfph

Vancouver

Wu H, Mohamed M, Gao C, Ding Z, Ganapathy M, Biswas P, et al. Cost-Effective One-Shot Stamping of Steel-Based High-Performance Lightweight Multi-Material Structures. Solid State Phenomena. 2026;387:95-101. doi:10.4028/p-b5pfph

BibTeX
@article{Wu2026,
  author = {Wu, Hao and Mohamed, Mohamed and Gao, Chunyi and Ding, Zerong and Ganapathy, Manikandan and Biswas, Pinaki and Verma, Rahul K. and Taylor, Ambrose and Li, Nan},
  title = {Cost-Effective One-Shot Stamping of Steel-Based High-Performance Lightweight Multi-Material Structures},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {387},
  pages = {95--101},
  doi = {10.4028/p-b5pfph}
}
Kostenlos starten →