Thermal Measurement during High-Velocity Oxy-Fuel Coating Process for Single and Multiple Pass Rotational Spraying
Key Engineering Materials · 13.04.2026 · 1047 · 205-212
DOI: 10.4028/p-8j71ld ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 13.04.2026. Verfasst von George Diyoke und 5 weiteren Autor:innen. Die Arbeit nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
High-velocity oxy-fuel spraying is a widely used thermal spray technology for producing dense and wear-resistant coatings. The thermal input during spraying strongly influences coating microstructure, residual stress state, and substrate integrity. In this work, in situ thermal measurements were performed on S235 substrates during High-velocity oxy-fuel deposition of 316L coatings. Two spraying strategies were compared: (i) single-pass rotation and (ii) multi-pass rotation. Thermocouples embedded at 1.8mm depth captured transient temperature responses, revealing significant thermal cycling effects. Single-pass operations produced no significant heating–cooling cycles, while multi-pass strategies led to thermal accumulation and overlapping cycles. The results provide reference data for the calibration of finite element heat source models and support the development of process–structure–property relationships in High-velocity oxy-fuel coatings.
Zitieren
APA
Diyoke, G., Yang, Y., Schindelbacher, C., Sperling, S., Angerler, J., & Härtel, S. (2026). Thermal Measurement during High-Velocity Oxy-Fuel Coating Process for Single and Multiple Pass Rotational Spraying. Key Engineering Materials, 1047, 205-212. https://doi.org/10.4028/p-8j71ld
Vancouver
Diyoke G, Yang Y, Schindelbacher C, Sperling S, Angerler J, Härtel S. Thermal Measurement during High-Velocity Oxy-Fuel Coating Process for Single and Multiple Pass Rotational Spraying. Key Engineering Materials. 2026;1047:205-212. doi:10.4028/p-8j71ld
BibTeX
@article{Diyoke2026,
author = {Diyoke, George and Yang, Yitong and Schindelbacher, Christoph and Sperling, Sebastian and Angerler, Jürgen and Härtel, Sebastian},
title = {Thermal Measurement during High-Velocity Oxy-Fuel Coating Process for Single and Multiple Pass Rotational Spraying},
journal = {Key Engineering Materials},
year = {2026},
volume = {1047},
pages = {205--212},
doi = {10.4028/p-8j71ld}
}
EUVIMED