Development of PID-Based RPM Control on Rotary Forcespinning for Nanofiber Fabrication
Journal of Metastable and Nanocrystalline Materials · 21.08.2026 · 44 · 31-38
DOI: 10.4028/p-8cjhw2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Metastable and Nanocrystalline Materials, online erschienen am 21.08.2026. Verfasst von Panji Setyo Nugroho und 3 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
This study reports the development of a PID-based rotational speed control system for a rotary forcespinning (RFS) device aimed at improving the stability of nanofiber fabrication. The system integrates an Arduino Nano as the main controller, an optocoupler-based RPM sensor as feedback, and a BTS7960 motor driver to regulate a high-speed DC motor. The PID controller was implemented in a closed-loop configuration to maintain stable rotational speeds across multiple setpoints. The accuracy of the RPM measurement system was validated using a commercial tachometer, yielding a high linear correlation with R² = 0.9997 and an average error of 0.23%. The dynamic response of the PID controller demonstrated rapid stabilization with minimal steady-state error at rotational speeds up to 11000 RPM. The performance of the developed RFS system was evaluated by fabricating nanofibers from a 10 wt% polyvinylpyrrolidone (PVP) solution at rotational speeds of 7000; 9000; and 11000 RPM. The results show that stable and precise RPM control significantly influences the resulting nanofiber diameter and its distribution. These findings confirm that PID-based RPM control plays a critical role in enhancing operational stability and ensuring consistent nanofiber quality in rotary forcespinning systems.
Zitieren
APA
Nugroho, P. S., Maisa, K. N., Khairurrijal, K., & Hapidin, D. A. (2026). Development of PID-Based RPM Control on Rotary Forcespinning for Nanofiber Fabrication. Journal of Metastable and Nanocrystalline Materials, 44, 31-38. https://doi.org/10.4028/p-8cjhw2
Vancouver
Nugroho PS, Maisa KN, Khairurrijal K, Hapidin DA. Development of PID-Based RPM Control on Rotary Forcespinning for Nanofiber Fabrication. Journal of Metastable and Nanocrystalline Materials. 2026;44:31-38. doi:10.4028/p-8cjhw2
BibTeX
@article{Nugroho2026,
author = {Nugroho, Panji Setyo and Maisa, Kamilah Nada and Khairurrijal, Khairurrijal and Hapidin, Dian Ahmad},
title = {Development of PID-Based RPM Control on Rotary Forcespinning for Nanofiber Fabrication},
journal = {Journal of Metastable and Nanocrystalline Materials},
year = {2026},
volume = {44},
pages = {31--38},
doi = {10.4028/p-8cjhw2}
}
EUVIMED