EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Origami-Inspired Design for Manufacture of Composite Parts

Sutharsanan Navaratnarajah, Vincent K. Maes, Mark Schenk, James Kratz

Solid State Phenomena · 20.04.2026 · 391 · 107-114

DOI: 10.4028/p-7bow8j ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 20.04.2026. Verfasst von Sutharsanan Navaratnarajah und 3 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

During dry fibre processing, manufacturing geometrically complex composite parts often produces wrinkles when fabrics deform beyond their shear limits. This work proposes a design-for-manufacture approach based on origami principles, which modifies component geometry so that deformation remains within allowable deformation limits. A baseline aircraft spar geometry is considered; an origami-inspired version, along with several intermediate designs between these two extremes, are generated. Preliminary forming trials with unidirectional non-crimp fabrics show that the origami-based geometry is inherently manufacturable without defects, and that a selected intermediate design also form successfully, confirming a larger manufacturable design space than classical origami permits. Results further show that wrinkle severity increases with increasing angular defect. This provides a foundation for linking geometric measures to draping mechanics to guide the design of wrinkle-free composite components without requiring computationally expensive simulations.

Zitieren

APA

Navaratnarajah, S., Maes, V. K., Schenk, M., & Kratz, J. (2026). Origami-Inspired Design for Manufacture of Composite Parts. Solid State Phenomena, 391, 107-114. https://doi.org/10.4028/p-7bow8j

Vancouver

Navaratnarajah S, Maes VK, Schenk M, Kratz J. Origami-Inspired Design for Manufacture of Composite Parts. Solid State Phenomena. 2026;391:107-114. doi:10.4028/p-7bow8j

BibTeX
@article{Navaratnarajah2026,
  author = {Navaratnarajah, Sutharsanan and Maes, Vincent K. and Schenk, Mark and Kratz, James},
  title = {Origami-Inspired Design for Manufacture of Composite Parts},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {391},
  pages = {107--114},
  doi = {10.4028/p-7bow8j}
}
Kostenlos starten →