Fabrication and Thermomechanical Processing of Titanium-Based Laminates for Enhanced Performance under High Dynamic Impact
Materials Science Forum · 19.01.2026 · 1176 · 15-21
DOI: 10.4028/p-6pmbei ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 19.01.2026. Verfasst von Sergey Prikhodko und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben.
Abstract (Originalsprache)
The trade-off between strength and toughness remains a major challenge in structural materials engineering, especially for titanium-based materials. This study explores the potential of titanium-based laminates for lightweight armor, aimed at improving anti-ballistic properties through the use of layered structures. Titanium alloy Ti-6Al-4V (Ti64) was combined with metal matrix composites (MMCs) reinforced with TiC or TiB particles (up to 40 vol%) using two powder metallurgy (PM) techniques. The first approach used press-and-sinter blended elemental powder metallurgy (BEPM) to create the laminates in a single step, while the second involved post-processing via hot isostatic pressing (HIP) to enhance material properties. Both fabrication methods produced laminates that significantly outperformed commercial alternatives in ballistic testing against 7.62 mm armor-piercing bullets. The use of HIP post-BEPM enhances material properties by reducing porosity and increasing hardness, highlighting the complementary nature of these technologies in producing efficient and cost-effective armor materials.
Zitieren
APA
Prikhodko, S., Markovsky, P. E., & Savvakin, D. G. (2026). Fabrication and Thermomechanical Processing of Titanium-Based Laminates for Enhanced Performance under High Dynamic Impact. Materials Science Forum, 1176, 15-21. https://doi.org/10.4028/p-6pmbei
Vancouver
Prikhodko S, Markovsky PE, Savvakin DG. Fabrication and Thermomechanical Processing of Titanium-Based Laminates for Enhanced Performance under High Dynamic Impact. Materials Science Forum. 2026;1176:15-21. doi:10.4028/p-6pmbei
BibTeX
@article{Prikhodko2026,
author = {Prikhodko, Sergey and Markovsky, Pavlo E. and Savvakin, Dmytro G.},
title = {Fabrication and Thermomechanical Processing of Titanium-Based Laminates for Enhanced Performance under High Dynamic Impact},
journal = {Materials Science Forum},
year = {2026},
volume = {1176},
pages = {15--21},
doi = {10.4028/p-6pmbei}
}
EUVIMED