EUVIMEDEUVIMED entdecken
Crossref

Curing-Induced Network Topology for Tailoring Structure and Functional Properties of Epoxy-Urethane Materials

Anna Skripinets, Natalia Saienko, Galina Gurina, Oleksii Kabus

Materials Science Forum · 11.11.2026 · 1200 · 27-35

DOI: 10.4028/p-64d0js ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 11.11.2026. Verfasst von Anna Skripinets und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the relationship between polymer network topology, curing kinetics, and functional properties of epoxy-urethane (EU) compositions. The initial curing stage was analyzed using a dielectric method, while pot life, degree of curing, network parameters, viscoelastic, damping, and physicomechanical properties were also systematically evaluated. The curing kinetics were strongly dependent on both composition and temperature. The apparent activation energy for ED-20 cured with diethylenetriamine (DETA) was 50.3 kJ/mol, whereas the curing rate of oligoethercyclocarbonate (OTC) at 303 K was 1.7 times higher due to the higher reactivity of primary amine groups. Increasing ED-20 content to 10-30 wt.% reduced the curing rate and pot life, while promoting the formation of a denser crosslinked network with a gel fraction up to 95 %. Compositions containing ~20 wt.% ED-20 exhibited increased crosslinking density, higher glassy-state modulus, and improved damping capacity. Adhesive strength and abrasion resistance were enhanced through stronger interfacial interactions and a denser network, while elasticity was maintained; impact strength showed a moderate decrease at the highest ED-20 fraction. These results demonstrate that composition and curing conditions can be used to effectively tailor network topology, viscoelastic behavior, and overall functional performance, providing guidance for the design of EU materials for structural applications under cyclic mechanical loading.

Zitieren

APA

Skripinets, A., Saienko, N., Gurina, G., & Kabus, O. (2026). Curing-Induced Network Topology for Tailoring Structure and Functional Properties of Epoxy-Urethane Materials. Materials Science Forum, 1200, 27-35. https://doi.org/10.4028/p-64d0js

Vancouver

Skripinets A, Saienko N, Gurina G, Kabus O. Curing-Induced Network Topology for Tailoring Structure and Functional Properties of Epoxy-Urethane Materials. Materials Science Forum. 2026;1200:27-35. doi:10.4028/p-64d0js

BibTeX
@article{Skripinets2026,
  author = {Skripinets, Anna and Saienko, Natalia and Gurina, Galina and Kabus, Oleksii},
  title = {Curing-Induced Network Topology for Tailoring Structure and Functional Properties of Epoxy-Urethane Materials},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1200},
  pages = {27--35},
  doi = {10.4028/p-64d0js}
}
Kostenlos starten →