EUVIMEDEUVIMED entdecken
Crossref

Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel

Jorge Adam C. Cohn, Altair L. de Souza, Nerea Isasti, Pello Uranga, Paulo Haddad, Marcelo A. Rebellato, Antonio A. Gorni

Materials Science Forum · 29.11.2023 · 1105 · 167-172

DOI: 10.4028/p-5btkpk ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 29.11.2023. Verfasst von Jorge Adam C. Cohn und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 5 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flat low carbon microalloyed structural steels processed by controlled rolling have excellent mechanical properties, particularly regarding toughness, since austenite is rolled with full recrystallization between rolling passes (roughing stage at high temperatures), and, subsequently, with no recrystallization at all between passes (finishing stage at low temperatures), maximizing nucleation of ferrite grains during austenite transformation after hot rolling. However, rolling must be prompted in an intermediate temperature range where recrystallization of austenite between rolling passes occurs partially, as this can lead to great heterogeneity in the grain size distribution of the product, a potential condition to impairs its low temperature toughness. On the other hand, this holding period that is necessary to avoid rolling within this temperature range can last several minutes, reducing the productivity of the rolling line and, in this way, potentially harming the financial performance of the plant. This work was developed to analyze several proposed rolling conditions for the finishing stage during controlled rolling of 16 mm thick strips of a low C Nb-Ti microalloyed steel strip, 380 MPa structural grade, processed in a Steckel mill, to identify the best condition that provides maximum productivity without affecting the required microstructural, toughness and mechanical characteristics of the final product.

Zitieren

APA

Cohn, J. A. C., Souza, A. L. D., Isasti, N., Uranga, P., Haddad, P., Rebellato, M. A., & Gorni, A. A. (2023). Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel. Materials Science Forum, 1105, 167-172. https://doi.org/10.4028/p-5btkpk

Vancouver

Cohn JAC, Souza ALD, Isasti N, Uranga P, Haddad P, Rebellato MA, et al. Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel. Materials Science Forum. 2023;1105:167-172. doi:10.4028/p-5btkpk

BibTeX
@article{Cohn2023,
  author = {Cohn, Jorge Adam C. and Souza, Altair L. de and Isasti, Nerea and Uranga, Pello and Haddad, Paulo and Rebellato, Marcelo A. and Gorni, Antonio A.},
  title = {Influence of the Holding Thickness and Process in the Microstructure and Mechanical Properties of a Microalloyed 380 MPa Structural Steel},
  journal = {Materials Science Forum},
  year = {2023},
  volume = {1105},
  pages = {167--172},
  doi = {10.4028/p-5btkpk}
}
Kostenlos starten →