Phosphoric Acid Reuse for High-Selectivity Silicon Nitride/Silicon Dioxide Wet Etching via Fixed Automated Process Control in Memory Devices
Solid State Phenomena · 29.10.2026 · 395 · 275-280
DOI: 10.4028/p-58ymz2 ↗Kurz gefasst
Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 29.10.2026. Verfasst von Byungsu Kim und 5 weiteren Autor:innen. Die Arbeit nennt 9 Literaturangaben.
Abstract (Originalsprache)
In this study, a Batch Fix APC(Automated Process Control) system was implemented to address etch rate instability issues in the selective Si 3 N 4 / SiO 2 wet etching process of DRAM devices using phosphoric acid (H₃PO₄) baths. The etch rate instability was primarily attributed to the accumulation of silica residues and chemical concentration fluctuations induced by bath aging, which resulted in increased variability in the SiO 2 etch rate. To mitigate this, the lower limit of the SiO 2 etch rate was defined based on XPS analysis, considering the impact of native oxide formation on the Si 3 N 4 surface, and an appropriate bath condition was established. Notably, the Batch Fix APC system played a critical role in maintaining stable Si 3 N 4 /SiO 2 selectivity and etch rates by precisely controlling the etch time at each process step according to a predefined lookup table, using bath concentration, temperature, and life count as input parameters. This approach ensured stable process performance despite bath aging and real-time chemical concentration fluctuations. The system also reduced the frequency of chemical replacements, resulting in a 5.52% increase in productivity, and improved chemical reuse efficiency, achieving a 33% cost reduction per cycle.Furthermore, by integrating Batch Fix APC with real-time in-line thickness monitoring, this approach can be extended to patterned DRAM device processes, contributing significantly to process stability and yield management in high-volume manufacturing environments.
Zitieren
APA
Kim, B., Shin, D., Kang, M., Kwon, S., Lee, D., & Kim, T. (2026). Phosphoric Acid Reuse for High-Selectivity Silicon Nitride/Silicon Dioxide Wet Etching via Fixed Automated Process Control in Memory Devices. Solid State Phenomena, 395, 275-280. https://doi.org/10.4028/p-58ymz2
Vancouver
Kim B, Shin D, Kang M, Kwon S, Lee D, Kim T. Phosphoric Acid Reuse for High-Selectivity Silicon Nitride/Silicon Dioxide Wet Etching via Fixed Automated Process Control in Memory Devices. Solid State Phenomena. 2026;395:275-280. doi:10.4028/p-58ymz2
BibTeX
@article{Kim2026,
author = {Kim, Byungsu and Shin, Duri and Kang, Modong and Kwon, Sangwook and Lee, Dongkyu and Kim, Taesung},
title = {Phosphoric Acid Reuse for High-Selectivity Silicon Nitride/Silicon Dioxide Wet Etching via Fixed Automated Process Control in Memory Devices},
journal = {Solid State Phenomena},
year = {2026},
volume = {395},
pages = {275--280},
doi = {10.4028/p-58ymz2}
}
EUVIMED