Numerical Investigation of Fatigue Crack Propagation in High-Performance Aluminum Alloys
Key Engineering Materials · 05.08.2026 · 1061 · 141-160
DOI: 10.4028/p-55t0ve ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 05.08.2026. Verfasst von Mohammad Ashraf Hossain und 3 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben.
Abstract (Originalsprache)
This work presents ANSYS Workbench simulations analyzing fatigue crack propagation in high-performance aluminum alloys 2524-T3, 2024-T42, and 2024-T351 under stress ratios R = 0.1, 0.3, and 0.5 using pre-meshed crack tools and SMART Fracture automation. Key simulation outputs include crack length evolution, cycle count, equivalent stress intensity factor ranges (ΔK), and crack resistance curves (Kr). At R = 0.1, 2524-T3 exhibited the highest crack growth rate (da/dN = 3.20×10⁻⁸ mm/cycle, ΔK = 7.28 MPa√m, Nf ≈ 459×10⁶ cycles), while 2024-T351 showed the lowest rate (da/dN = 2.76×10⁻⁹ mm/cycle, ΔK = 1.65 MPa√m, Nf ≈ 5.27×10⁹ cycles) — a 10.4-fold reduction in da/dN and 11.5-fold increase in fatigue life. At R = 0.5, 2024-T351 achieved da/dN < 1.0×10⁻⁸ mm/cycle with Nf > 6×10⁹ cycles, outperforming 2024-T42 (da/dN = 3.82×10⁻⁹ mm/cycle, Nf ≈ 2.92×10⁹) and 2524-T3 (da/dN = 2.76×10⁻⁹ mm/cycle, Nf ≈ 5.27×10⁹). Kr curve analysis revealed steep resistance decay for 2524-T3 (R = 0.1), stable plateau behavior for 2024-T42 (R = 0.3–0.5), and rising Kr trends for 2024-T351 across all R-ratios, indicating active crack-tip shielding mechanisms. SEM fractography validated simulation trends: 2524-T3 showed brittle trans granular features with secondary crack density of 12.3 ± 2.1 cracks/mm²; 2024-T42 exhibited mixed-mode fracture with moderate dimple density (8.7 ± 1.4 μm⁻²); 2024-T351 displayed ductile dimple morphology with the highest dimple density (18.4 ± 2.6 μm⁻²) and minimal secondary cracking (2.1 ± 0.8 cracks/mm²). These microstructural metrics confirm 2024-T351 as the optimal candidate for fatigue-critical aerospace and automotive applications.
Zitieren
APA
Hossain, M. A., Siddiq, M. U., Javed, J., & Musa, M. M. E. (2026). Numerical Investigation of Fatigue Crack Propagation in High-Performance Aluminum Alloys. Key Engineering Materials, 1061, 141-160. https://doi.org/10.4028/p-55t0ve
Vancouver
Hossain MA, Siddiq MU, Javed J, Musa MME. Numerical Investigation of Fatigue Crack Propagation in High-Performance Aluminum Alloys. Key Engineering Materials. 2026;1061:141-160. doi:10.4028/p-55t0ve
BibTeX
@article{Hossain2026,
author = {Hossain, Mohammad Ashraf and Siddiq, Muhammad Usman and Javed, Jahanzeb and Musa, Moneef Mohamed Elobaid},
title = {Numerical Investigation of Fatigue Crack Propagation in High-Performance Aluminum Alloys},
journal = {Key Engineering Materials},
year = {2026},
volume = {1061},
pages = {141--160},
doi = {10.4028/p-55t0ve}
}
EUVIMED