A Preliminary Investigation on Recycled PET-Derived Polyurethane Films: Role of NCO/OH Ratio in Film Development
Defect and Diffusion Forum · 02.02.2026 · 447 · 33-40
DOI: 10.4028/p-3irihq ↗Kurz gefasst
Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 02.02.2026. Verfasst von Panachai Thusanaphoom und 8 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 21 Literaturangaben.
Abstract (Originalsprache)
This study presents the synthesis of polyurethane (PU) films using recycled polyethylene terephthalate (rPET) as a sustainable substrate. The rPET was depolymerized through the glycolysis reaction to produce a polyol, which was then reacted with polymeric methylene diphenyl diisocyanate (PMDI) via solution polymerization to form Polyurethane Film. The effect of varying NCO/OH molar ratios (1.00, 1.25, and 1.50) on the properties of the resulting films was investigated, with a focus on enhancing mechanical performance. The PU films were characterized by their physical appearance, FT-IR spectroscopy, and mechanical properties. At the NCO/OH ratio of 1.00, the PU remained in the form of sticky substance like glue and was unable to form into a solid film. However, increasing the ratio to 1.25 and 1.50 resulted in continuous, flexible films with significantly improved mechanical strength. FT-IR analysis confirmed the formation of urethane linkages, as evidenced by a clear reduction in –OH and –NCO functional groups after the film forming. The best performance was observed at an NCO/OH ratio of 1.50, yielding a PU film with a Young’s modulus of 0.528 N/mm², tensile strength of 1.289 N/mm², and elongation at break of 496.587%. These results highlight the importance of the NCO/OH ratio in tailoring films with suitable properties and support the potential of rPET-based PU as a sustainable material for advanced applications.
Zitieren
APA
Thusanaphoom, P., Pokamas, K., Yingshataporn-A-Nan, T., Panyachan, T., Parneam, N., Ayutthaya, S. I. N., Chailad, W., Songsri, S., & Sukhawipat, N. (2026). A Preliminary Investigation on Recycled PET-Derived Polyurethane Films: Role of NCO/OH Ratio in Film Development. Defect and Diffusion Forum, 447, 33-40. https://doi.org/10.4028/p-3irihq
Vancouver
Thusanaphoom P, Pokamas K, Yingshataporn-A-Nan T, Panyachan T, Parneam N, Ayutthaya SIN, et al. A Preliminary Investigation on Recycled PET-Derived Polyurethane Films: Role of NCO/OH Ratio in Film Development. Defect and Diffusion Forum. 2026;447:33-40. doi:10.4028/p-3irihq
BibTeX
@article{Thusanaphoom2026,
author = {Thusanaphoom, Panachai and Pokamas, Kritsana and Yingshataporn-A-Nan, Thanathach and Panyachan, Tharanin and Parneam, Nismar and Ayutthaya, Siriorn Isarankura Na and Chailad, Wichain and Songsri, Sineenard and Sukhawipat, Nathapong},
title = {A Preliminary Investigation on Recycled PET-Derived Polyurethane Films: Role of NCO/OH Ratio in Film Development},
journal = {Defect and Diffusion Forum},
year = {2026},
volume = {447},
pages = {33--40},
doi = {10.4028/p-3irihq}
}
EUVIMED