Effect of Filler Weight Percentage on the Permittivity of Coconut Shell–Epoxy Composites
Materials Science Forum · 25.06.2026 · 1195 · 139-144
DOI: 10.4028/p-2zbowk ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 25.06.2026. Verfasst von K.B. Mekha und 5 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.
Abstract (Originalsprache)
The growing electronic waste crisis and demand for sustainable materials have intensified the need for eco-friendly dielectric composites. While coconut shell (CS) waste shows promise as a renewable filler, the quantitative relationships between its filler percentage and dielectric properties remain unexplored, limiting its practical application. This study employs both computational and experimental approaches to investigate CS-reinforced epoxy composites, aiming to establish regression models for permittivity optimization. Ten baseline composites were fabricated with CS particles (0–95 wt.%). Permittivity was measured at 5 GHz via waveguide transmission, and a Python-based polynomial regression model was developed to correlate filler loading with dielectric performance. Permittivity ranged from 2.65 to 3.42, with higher filler content enhancing polarization. The model achieved an R² of 0.9577 for filler percentage. CS-epoxy composites offer tunable permittivity for green electronics, while the regression model enables efficient material design. This work bridges the gap between the valorization of agricultural waste and the development of high-performance dielectrics.
Zitieren
APA
Mekha, K., Sudhakar, K., Zainol, N., Karim, M. S. A., Fikry, M., & Yusof, N. A. T. (2026). Effect of Filler Weight Percentage on the Permittivity of Coconut Shell–Epoxy Composites. Materials Science Forum, 1195, 139-144. https://doi.org/10.4028/p-2zbowk
Vancouver
Mekha K, Sudhakar K, Zainol N, Karim MSA, Fikry M, Yusof NAT. Effect of Filler Weight Percentage on the Permittivity of Coconut Shell–Epoxy Composites. Materials Science Forum. 2026;1195:139-144. doi:10.4028/p-2zbowk
BibTeX
@article{Mekha2026,
author = {Mekha, K.B. and Sudhakar, K. and Zainol, Norazwina and Karim, Mohamad Shaiful Abdul and Fikry, Mohammad and Yusof, Nurhafizah Abu Talip},
title = {Effect of Filler Weight Percentage on the Permittivity of Coconut Shell–Epoxy Composites},
journal = {Materials Science Forum},
year = {2026},
volume = {1195},
pages = {139--144},
doi = {10.4028/p-2zbowk}
}
EUVIMED