EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

LDPE Film Waste Treatment into Liquid Fuel Using Catalytic Cracking

Jenny Novianti Muliarahayu Soetedjo, Michael Osborn, Lucas Adriel Setiawan, Farhan Azka Fadillah, Felicia Tjandra, Kevin Frendy Mulya, Evan Rariel Nehemia, Tedi Hudaya

Engineering Chemistry · 2023

DOI: 10.4028/p-1t2bpt ↗

Kurz gefasst

Fachartikel in der Zeitschrift Engineering Chemistry, 2023. Verfasst von Jenny Novianti Muliarahayu Soetedjo und 7 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plastic industry development has increased the amount of plastic waste, including LDPE plastic film, therefore LDPE waste processing becomes essential, such as thermal or catalytic cracking. Cracking is the breakdown of complex hydrocarbons into simple and commercial hydrocarbons (C 3 -C 40 ). The catalytic cracking is preferred due to lower temperatures, which is 200-300°C instead of 500-700°C. In this study, catalyst selection, acid impregnation of catalyst, catalyst loading (wt%), N 2 -gas-purging, feed-to-solvent weight-ratio, temperature, and reaction time were studied to determine the most suitable process condition to obtain the highest liquid fraction. In this study, the catalytic cracking was conducted at 20 bar with kerosene as solvent, with and without N 2 -gas-purging at several temperatures (265 and 295°C), solvent-to-feed weight-ratios (5:1 and 4:1), catalyst types (bentonite, SiO 2 and ZSM-5), catalyst loading (wt%) (1.0wt%; 5.0wt%; 7.0wt%; 9.0wt%; 10.0wt%), and reaction time (1-3 hours). The best results were with N 2 -gas-purging using 10.0wt%-bentonite in (5:1) solvent-to-feed weight-ratio for 1 hour at 295 ο C produced 54.9wt% of liquid fraction and without N 2 -gas-purging at 265°C produced 54.5wt% of liquid fraction, indicating the possibility of N 2 -gas-purging exclusion in future studies. Additionally, this study has promoted bentonite as a potentially viable catalyst for LDPE plastic waste catalytic cracking.

Zitieren

APA

Soetedjo, J. N. M., Osborn, M., Setiawan, L. A., Fadillah, F. A., Tjandra, F., Mulya, K. F., Nehemia, E. R., & Hudaya, T. (2023). LDPE Film Waste Treatment into Liquid Fuel Using Catalytic Cracking. Engineering Chemistry. https://doi.org/10.4028/p-1t2bpt

Vancouver

Soetedjo JNM, Osborn M, Setiawan LA, Fadillah FA, Tjandra F, Mulya KF, et al. LDPE Film Waste Treatment into Liquid Fuel Using Catalytic Cracking. Engineering Chemistry. 2023. doi:10.4028/p-1t2bpt

BibTeX
@article{Soetedjo2023,
  author = {Soetedjo, Jenny Novianti Muliarahayu and Osborn, Michael and Setiawan, Lucas Adriel and Fadillah, Farhan Azka and Tjandra, Felicia and Mulya, Kevin Frendy and Nehemia, Evan Rariel and Hudaya, Tedi},
  title = {LDPE Film Waste Treatment into Liquid Fuel Using Catalytic Cracking},
  journal = {Engineering Chemistry},
  year = {2023},
  doi = {10.4028/p-1t2bpt}
}
Kostenlos starten →