Effect of Anodizing Voltage and Tobacco Extract Addition on the Structure of Porous Anodic Aluminum Oxide (PAAO) Layer
Journal of Metastable and Nanocrystalline Materials · 2024
DOI: 10.4028/p-0vrmiv ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Metastable and Nanocrystalline Materials, 2024. Verfasst von Akhmad Zein Eko Mustofa und 3 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben.
Abstract (Originalsprache)
Porous Anodic Aluminum oxide (PAAO) is a porous oxide layer resulting from anodization. The structure of PAAO is influenced by anodization parameters, i.e., voltage and electrolyte composition. Increasing anodization voltage can affect the process of pore formation and oxide growth during anodization. Adding additives such as ethanol, propanol, and polyethylene glycol (PEG) can increase pore regularity and affect the structure of PAAO. In this study, tobacco extract (TE) was added to the oxalic acid-based anodizing solution. TE has many active compounds that may affect pore formation and oxide growth. Morphological analysis shows decreased pore diameter when adding tobacco extracts with concentrations of 0, 0.1, and 0.5 g/L, namely 43.92, 41.42, and 37.8 nm at anodization voltage 40 V. In anodization with a voltage of 60 V, a decrease in pore diameter was obtained with 46.47, 34.24, and 26.8 nm for adding tobacco extract 0, 0.1, and 0.5 g/L. The thickness of PAAO increases from 6.45 µm to 16.87 µm with increasing anodization voltage and tobacco extract concentration. The increase of tobacco extract concentration can lead to the decrease of the XRD peak intensity, where the sequence of the most significant decrease was observed for the peaks of (111), (220), (200), and (311), respectively. A decrease in the intensity ratio of (111) and (220) AAO peaks indicates the influence of tobacco extract on the anodization process. Further thermal analysis by Thermo-gravimetric (TG) shows an increase in mass loss from 1.47 to 5.37% with increasing tobacco extract concentration from 0 g/L to 0.5 g/L. TG results indicate the incorporation of tobacco extract in the inner pore wall.
Zitieren
APA
Mustofa, A. Z. E., Adhika, D. R., Ramelan, A., & Susana, S. (2024). Effect of Anodizing Voltage and Tobacco Extract Addition on the Structure of Porous Anodic Aluminum Oxide (PAAO) Layer. Journal of Metastable and Nanocrystalline Materials. https://doi.org/10.4028/p-0vrmiv
Vancouver
Mustofa AZE, Adhika DR, Ramelan A, Susana S. Effect of Anodizing Voltage and Tobacco Extract Addition on the Structure of Porous Anodic Aluminum Oxide (PAAO) Layer. Journal of Metastable and Nanocrystalline Materials. 2024. doi:10.4028/p-0vrmiv
BibTeX
@article{Mustofa2024,
author = {Mustofa, Akhmad Zein Eko and Adhika, Damar Rastri and Ramelan, Aditianto and Susana, Susana},
title = {Effect of Anodizing Voltage and Tobacco Extract Addition on the Structure of Porous Anodic Aluminum Oxide (PAAO) Layer},
journal = {Journal of Metastable and Nanocrystalline Materials},
year = {2024},
doi = {10.4028/p-0vrmiv}
}
EUVIMED