Performance Analysis of Laser Treated and Cryogenic Treated Solid Carbide Microdrill for Machining CFRP
Revista de Metalurgia · 30.07.2026 · 62 (2) · e299
DOI: 10.3989/revmetalm.e299.1773 ↗Kurz gefasst
Fachartikel in der Zeitschrift Revista de Metalurgia, online erschienen am 30.07.2026. Verfasst von Selvarasu Sakthi und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The use of carbon-fiber-reinforced polymers (CFRPs) is common in high-performance engineering because it has a high strength-to-weight ratio and mechanical characteristics. Nevertheless, micro-holes of CFRP laminates are difficult to obtain in high-quality because of the destruction created by drilling, especially delamination. In this research, micro-drilling tests were performed on CFRP laminates in a vertical machining center, taking into account the spindle speed, feed rate and drill treatment conditions. The performance of drilling was assessed in terms of thrust force and entry delamination factor. An experimental design was conducted with the help of a Taguchi L9 orthogonal array, and signal-to-noise (S/N) ratio and Analysis of variance (ANOVA) were used to analyze the results. The analysis indicated that the most influential factor is the drill condition, which contributed about 66% to the variation, then the spindle speed, and the feed rate had little influence. The cryogenically treated drill greatly enhanced performance, minimizing the thrust force to at least 1.6 N and delamination factor to 0.32 in experimental conditions. The optimum drilling parameters were confirmed thus it indicated that the responses predicted were in good agreement with confirmation results. The results indicate that statistical optimization of the tool surface modification is extremely useful in reducing the damaging effects of drilling, which offers viable advice on the high-precision production of micro-holes in CFRP.
Zitieren
APA
Sakthi, S., Arunkumar, A., Sabanayagam, S., & Vivekananthan, M. (2026). Performance Analysis of Laser Treated and Cryogenic Treated Solid Carbide Microdrill for Machining CFRP. Revista de Metalurgia, 62(2), e299. https://doi.org/10.3989/revmetalm.e299.1773
Vancouver
Sakthi S, Arunkumar A, Sabanayagam S, Vivekananthan M. Performance Analysis of Laser Treated and Cryogenic Treated Solid Carbide Microdrill for Machining CFRP. Revista de Metalurgia. 2026;62(2):e299. doi:10.3989/revmetalm.e299.1773
BibTeX
@article{Sakthi2026,
author = {Sakthi, Selvarasu and Arunkumar, Anbazhagan and Sabanayagam, Sundaram and Vivekananthan, Mathiazhagan},
title = {Performance Analysis of Laser Treated and Cryogenic Treated Solid Carbide Microdrill for Machining CFRP},
journal = {Revista de Metalurgia},
year = {2026},
volume = {62},
number = {2},
pages = {e299},
doi = {10.3989/revmetalm.e299.1773}
}
EUVIMED