Mechanical characterisation of 3D printed concrete masonry units with high aggregate and mineral addition content
Materiales de Construcción · 30.03.2026 · 76 (361) · e401
DOI: 10.3989/mc.2026.412825 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materiales de Construcción, online erschienen am 30.03.2026. Verfasst von R.F. Nascimento und 4 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The present study aims to expand the understanding of cementitious mixtures with low cement content and high levels of mineral additions and aggregates in order to assess their influence on the constructive characteristics of printing elements representative of structural masonry. The printing parameters and geometry of the pieces were defined to create a structure that can stand without internal bracing, with the goal of making the masonry construction process faster and simpler to print. In the hardened state, water absorption, the compressive and flexural strength of small pieces, as well as the compressive strength of 3DCP blocks and layer bonding, were evaluated. The results demonstrate that, for the parameters adopted in the printing system used, it is possible to construct volumetric masonry elements with mixtures that have higher aggregate content and partial cement replacement with limestone filler and metakaolin, achieving satisfactory results in buildability, mechanical strength, and efficiency.
Zitieren
APA
Nascimento, R., Anjos, M., Júnior, J. N., Pessoa, L., & Dias, L. (2026). Mechanical characterisation of 3D printed concrete masonry units with high aggregate and mineral addition content. Materiales de Construcción, 76(361), e401. https://doi.org/10.3989/mc.2026.412825
Vancouver
Nascimento R, Anjos M, Júnior JN, Pessoa L, Dias L. Mechanical characterisation of 3D printed concrete masonry units with high aggregate and mineral addition content. Materiales de Construcción. 2026;76(361):e401. doi:10.3989/mc.2026.412825
BibTeX
@article{Nascimento2026,
author = {Nascimento, R.F. and Anjos, M.A.S. and Júnior, J.P. Nascimento and Pessoa, L.R. and Dias, L.S.},
title = {Mechanical characterisation of 3D printed concrete masonry units with high aggregate and mineral addition content},
journal = {Materiales de Construcción},
year = {2026},
volume = {76},
number = {361},
pages = {e401},
doi = {10.3989/mc.2026.412825}
}
EUVIMED