Structure formation by hot extrusion of thermoelectric bismuth chalcogenide solid solution rods
Modern Electronic Materials · 31.12.2019 · 5 (4) · 181-185
DOI: 10.3897/j.moem.5.4.52932 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modern Electronic Materials, online erschienen am 31.12.2019. Verfasst von Vladimir T. Bublik und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Major advantage of extruded Bi 2 Te 3 based thermoelectric materials is high mechanical strength compared with that of melt-crystallized materials. Mechanical properties are of special importance for thermogenerator module applications where thermogenerator branches may undergo elevated thermal stresses due to large temperature differences at the modules. Since extrusion is typically a high-temperature process the structure of extruded materials is controlled by the plastic deformation in multiple slip systems resulting in the formation of a final deformed structure. The grain orientations are predominantly such that the most probable cleavage plane orientation is parallel to the extrusion axis. Recovery processes occur simultaneously and different recrystallization stages may take place. In the latter case the deformed texture may be destroyed. Structure evolution along the extruded rod of Bi 2 Se 0.3 Te 2.7 ternary solid solution was studied with metallography and X-ray diffraction. Extrusion was interrupted for the study and so the specimen was a whole rod the initial part of which was the extrusion billet and the final part was the as-extruded material. The structure of the material is formed by competitive processes of dislocation generation and annealing. The plastic deformation energy is the highest in the extruder zone of the rod. Both the hardening processes and the texture are controlled by the plastic deformation mechanism. Plastic deformation is accompanied by generation of defects that are most likely vacancy type ones.
Zitieren
APA
Bublik, V. T., Lavrentev, M. G., Osvenskii, V. B., Parkhomenko, Y. N., & Tabachkova, N. Y. (2019). Structure formation by hot extrusion of thermoelectric bismuth chalcogenide solid solution rods. Modern Electronic Materials, 5(4), 181-185. https://doi.org/10.3897/j.moem.5.4.52932
Vancouver
Bublik VT, Lavrentev MG, Osvenskii VB, Parkhomenko YN, Tabachkova NY. Structure formation by hot extrusion of thermoelectric bismuth chalcogenide solid solution rods. Modern Electronic Materials. 2019;5(4):181-185. doi:10.3897/j.moem.5.4.52932
BibTeX
@article{Bublik2019,
author = {Bublik, Vladimir T. and Lavrentev, Mikhail G. and Osvenskii, Vladimir B. and Parkhomenko, Yuri N. and Tabachkova, Nataliya Yu.},
title = {Structure formation by hot extrusion of thermoelectric bismuth chalcogenide solid solution rods},
journal = {Modern Electronic Materials},
year = {2019},
volume = {5},
number = {4},
pages = {181--185},
doi = {10.3897/j.moem.5.4.52932}
}
EUVIMED