Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh
Energy and Thermofluids Engineering · 2020
DOI: 10.38208/ete.v1i1.9 ↗Kurz gefasst
Fachartikel in der Zeitschrift Energy and Thermofluids Engineering, 2020. Verfasst von Md. Anowar Hossain und 5 weiteren Autor:innen.
Abstract (Originalsprache)
In hot climatic regions, some kind of cooling system is necessary to avoid warmth and humidity. Many of the available cooling systems are not economic and sustainable. In this study, sustainable and feasible space/room cooling systems have been experimentally analyzed. A solar operated cooling system with two options have been designed and their performances are compared. Phase Change Material (PCM) is proposed to store thermal energy instead of a costly battery. A 1200-watt compressor and fin-type condenser are used to construct the vapor compression system. When the incoming air is passed through the cooling coil, it gets cool. For this cooling coil, 50 feet copper tube is used. The front side copper tube diameter of the fan is 3/8 inch and the backside tube diameter is 1/2 inch. It took about 35 minutes and 5 minutes to minimize the room temperature at the desired level in the case of the stand fan and duct fan, respectively. Furthermore, the stand fan and duct fan systems reduced 3 ℃ and 6 ℃ of the outside temperature, respectively.
Zitieren
APA
Hossain, M. A., Mahbubul, I. M., Aziz, M. A., Afroz, H. M. M., Islam, M. R., & Islam, M. J. (2020). Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh. Energy and Thermofluids Engineering. https://doi.org/10.38208/ete.v1i1.9
Vancouver
Hossain MA, Mahbubul IM, Aziz MA, Afroz HMM, Islam MR, Islam MJ. Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh. Energy and Thermofluids Engineering. 2020. doi:10.38208/ete.v1i1.9
BibTeX
@article{Hossain2020,
author = {Hossain, Md. Anowar and Mahbubul, I. M. and Aziz, Md. Abdul and Afroz, Hasan Mohammad Mostofa and Islam, Md. Rashedul and Islam, Md. Johirul},
title = {Development and performance analysis of a PCM based cooling fan for hot climate of Bangladesh},
journal = {Energy and Thermofluids Engineering},
year = {2020},
doi = {10.38208/ete.v1i1.9}
}
EUVIMED