Speed Control of DC Motor Using Chopper
International Journal of Innovative Science and Research Technology · 30.05.2026 · 2402
DOI: 10.38124/ijisrt/26may1418 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Innovative Science and Research Technology, online erschienen am 30.05.2026. Verfasst von Sisir Chettri und 4 weiteren Autor:innen. Die Arbeit nennt 4 Literaturangaben.
Abstract (Originalsprache)
This paper presents the design and implementation of an efficient speed control system for a DC motor using a MOSFET-based chopper. Traditional rheostatic methods suffer from significant power loss as heat, reducing overall efficiency to below 50%. To overcome this limitation, the proposed system employs Pulse Width Modulation (PWM) technique at a fixed switching frequency of 5 kHz. A power MOSFET (IRFZ44N) acts as a high-speed electronic switch, turning the motor supply on and off rapidly. By varying the duty cycle of the switching signal from 0% to 100%, the average voltage applied across the motor is proportionally controlled, thereby regulating its speed linearly. An Arduino microcontroller generates the PWM signal based on analog input from a potentiometer, allowing real-time speed adjustment. A freewheeling diode (1N4007) is connected in parallel with the motor to suppress voltage spikes caused by inductive kickback during the OFF period. This protection mechanism prevents damage to the MOSFET and ensures circuit reliability. The chopper-based method achieves high efficiency exceeding 85%, with minimal power dissipation in the switching element since the MOSFET operates either fully ON or fully OFF. Experimental results demonstrate smooth, ripple-free speed control from zero to rated RPM under various load conditions. The system also exhibits fast dynamic response and good torque regulation. Compared to conventional methods, the proposed chopper drive is cost-effective, compact, and reliable. This solution is well-suited for industrial automation, electric vehicles, robotics, and conveyor belt systems.
Zitieren
APA
Chettri, S., Luitel, Y., Rai, M., Lepcha, C., & Targain, J. (2026). Speed Control of DC Motor Using Chopper. International Journal of Innovative Science and Research Technology, 2402. https://doi.org/10.38124/ijisrt/26may1418
Vancouver
Chettri S, Luitel Y, Rai M, Lepcha C, Targain J. Speed Control of DC Motor Using Chopper. International Journal of Innovative Science and Research Technology. 2026:2402. doi:10.38124/ijisrt/26may1418
BibTeX
@article{Chettri2026,
author = {Chettri, Sisir and Luitel, Yuvaraj and Rai, Monika and Lepcha, Chinlop and Targain, Jehiel},
title = {Speed Control of DC Motor Using Chopper},
journal = {International Journal of Innovative Science and Research Technology},
year = {2026},
pages = {2402},
doi = {10.38124/ijisrt/26may1418}
}
EUVIMED