EUVIMEDEUVIMED entdecken
Crossref

The Conversion of an Internal Combustion Engine Motorcycle to a Full Electric Motorcycle: The Challenges and Opportunities

Emmanuel Favour Ijeh, Oghenekaro Ighoariemu, David Ayoola Oladapo, Ayomide Omoworare, Ogheneruona Divine Odize, Oluwafemi David Akinyemi, Chinedum Ogonna Mgbemena

International Journal of Innovative Science and Research Technology · 20.07.2026 · 335

DOI: 10.38124/ijisrt/26jul449 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Innovative Science and Research Technology, online erschienen am 20.07.2026. Verfasst von Emmanuel Favour Ijeh und 6 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In Nigeria, practically all forms of transportation including cars, motorcycles, trains, buses, etc. use internal combustion engines (ICEs) that are propelled by either gasoline or diesel fuel. Vehicles with internal combustion engines are more likely to cause environmental pollution, which has negative impacts on climate change. To reduce the negative consequences of ICE consumption, there is urgent need to switch to a more efficient but low fossil fuel consumption. This idea involves conversion of functional motorcycle powered by gasoline internal combustion engine into an electric motorcycle. This is consistent with the steps taken to use clean energy and lessen environmental degradation agents. The motorcycle's ICE components (engine, exhaust, and rear wheel) must be disassembled as part of this process. In addition, a battery (a form of energy storage), a motor controller, and an electric wheel motor hub the latter of which acts as the motorcycle's engine were installed. The battery and motor hub have the following specs: a lithium ion battery with a voltage of 48 volts and a current of 26 amps, a 1.5 KW electric wheel hub. Depending on the rider's weight, the battery might last up to 3 hours when in use at an average speed of 30 km/h. The motorcycle's speed, range, and operating duration are all dependent on the load it is carrying and the battery capacity. The use of an electric motorcycle is significantly more cost-effective and environmentally beneficial, and it is simple to operate and maneuver. Because it will run longer and travel farther, increasing the motor specification and battery capacity further boosts efficiency. Adopting electric vehicles in Nigeria will pave a way for utilizing cleaner energy in the transportation sector. With further development and research, it could be an economically viable project.

Zitieren

APA

Ijeh, E. F., Ighoariemu, O., Oladapo, D. A., Omoworare, A., Odize, O. D., Akinyemi, O. D., & Mgbemena, C. O. (2026). The Conversion of an Internal Combustion Engine Motorcycle to a Full Electric Motorcycle: The Challenges and Opportunities. International Journal of Innovative Science and Research Technology, 335. https://doi.org/10.38124/ijisrt/26jul449

Vancouver

Ijeh EF, Ighoariemu O, Oladapo DA, Omoworare A, Odize OD, Akinyemi OD, et al. The Conversion of an Internal Combustion Engine Motorcycle to a Full Electric Motorcycle: The Challenges and Opportunities. International Journal of Innovative Science and Research Technology. 2026:335. doi:10.38124/ijisrt/26jul449

BibTeX
@article{Ijeh2026,
  author = {Ijeh, Emmanuel Favour and Ighoariemu, Oghenekaro and Oladapo, David Ayoola and Omoworare, Ayomide and Odize, Ogheneruona Divine and Akinyemi, Oluwafemi David and Mgbemena, Chinedum Ogonna},
  title = {The Conversion of an Internal Combustion Engine Motorcycle to a Full Electric Motorcycle: The Challenges and Opportunities},
  journal = {International Journal of Innovative Science and Research Technology},
  year = {2026},
  pages = {335},
  doi = {10.38124/ijisrt/26jul449}
}
Kostenlos starten →