Static Structural Analysis of a Motorcycle Wheel Using Solid Works
International Journal of Innovative Science and Research Technology · 16.03.2026 · 3196
DOI: 10.38124/ijisrt/26feb714 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Innovative Science and Research Technology, online erschienen am 16.03.2026. Verfasst von Samuel Onoriode Igbudu und 2 weiteren Autor:innen. Die Arbeit nennt 12 Literaturangaben.
Abstract (Originalsprache)
The wheel is a vital component of a motorcycle as it aids in translation motion via its rotation. The condition of the wheel should be such as to maintain its proper function during its service life. This work presents the static structural analysis of aluminum alloy motorcycle wheel under static loading condition. The three - dimensional (3-D) model of the wheel (2.75x17) was generated, discretized, loaded and analyzed using Solid Works. The wheel was constrained at its mounting holes and loaded circumferentially along its rim with combined radial load and inflation pressure of 1800 N and 0.28 MPa, respectively. The displacement, stress and strain on the outer rim circumferential angular locations from 0 o degree (deg) to 180o symmetric about the point of contact with the ground were determined. It was observed that the absolute maximum displacement of about 3.09 mm was at 0o angular location, while the overall average absolute displacement within the range was about 1.62 mm/mm. The maximum value of the Von-Mises stress was about 20.9 MPa, which was the same at between 0o and 60o contact angle; with a mean absolute stress was about 20.3 MPa. The absolute maximum axial strain value was about 0.0235 mm/mm, while the maximum resultant strain value was about 0.0342 mm/mm and observed at ground contact. The values obtained for displacement, stress and strain were within their respective limiting values and their maximum absolute and resultant values were observed to occur at the point of contact of the wheel’s rim with the ground, which represents the critical location of the wheel.
Zitieren
APA
Igbudu, S. O., Jimoh, S. O., & Aimuanmwosa, I. O. (2026). Static Structural Analysis of a Motorcycle Wheel Using Solid Works. International Journal of Innovative Science and Research Technology, 3196. https://doi.org/10.38124/ijisrt/26feb714
Vancouver
Igbudu SO, Jimoh SO, Aimuanmwosa IO. Static Structural Analysis of a Motorcycle Wheel Using Solid Works. International Journal of Innovative Science and Research Technology. 2026:3196. doi:10.38124/ijisrt/26feb714
BibTeX
@article{Igbudu2026,
author = {Igbudu, Samuel Onoriode and Jimoh, Sumaila Omeiza and Aimuanmwosa, Iyeke Omagbemi},
title = {Static Structural Analysis of a Motorcycle Wheel Using Solid Works},
journal = {International Journal of Innovative Science and Research Technology},
year = {2026},
pages = {3196},
doi = {10.38124/ijisrt/26feb714}
}
EUVIMED