EUVIMEDEUVIMED entdecken
Crossref

Design of a Wind Turbine Blade Airfoil Profiles Suitable for Operation in Low Wind Speed Environment

Aliyu Abubakar, Mutari Hajara Ali

International Journal of Innovative Science and Research Technology · 11.05.2026 · 4050

DOI: 10.38124/ijisrt/26apr929 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Innovative Science and Research Technology, online erschienen am 11.05.2026. Verfasst von Aliyu Abubakar und 1 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents the design of a wind turbine blade airfoil profile tailored for efficient operation in low-windspeed environments. Baseline geometries were selected from low-Reynolds-number airfoils (NACA 2412, NACA 4412, NACA 4418, and NACA 4421). Optimization was carried out using the Non-dominated Sorting Genetic Algorithm II (NSGA-II), which systematically adjusted key geometric parameters camber, thickness distribution, leading-edge radius, and trailing-edge angle to enhance aerodynamic efficiency. Candidate airfoils were evaluated in terms of lift coefficient, cross-sectional area, and pressure coefficient distribution, subject to aerodynamic and structural constraints. The optimization process produced a Pareto front of feasible solutions, from which the optimal profile was selected. Results demonstrate that the optimized airfoils provide improved lift-to-drag performance and reduced cut-in wind speeds compared to baseline designs. These findings confirm that targeted aerodynamic optimization can significantly increase energy capture in low-wind-speed regions, thereby broadening the applicability of wind turbines in areas with limited wind resources.

Zitieren

APA

Abubakar, A., & Ali, M. H. (2026). Design of a Wind Turbine Blade Airfoil Profiles Suitable for Operation in Low Wind Speed Environment. International Journal of Innovative Science and Research Technology, 4050. https://doi.org/10.38124/ijisrt/26apr929

Vancouver

Abubakar A, Ali MH. Design of a Wind Turbine Blade Airfoil Profiles Suitable for Operation in Low Wind Speed Environment. International Journal of Innovative Science and Research Technology. 2026:4050. doi:10.38124/ijisrt/26apr929

BibTeX
@article{Abubakar2026,
  author = {Abubakar, Aliyu and Ali, Mutari Hajara},
  title = {Design of a Wind Turbine Blade Airfoil Profiles Suitable for Operation in Low Wind Speed Environment},
  journal = {International Journal of Innovative Science and Research Technology},
  year = {2026},
  pages = {4050},
  doi = {10.38124/ijisrt/26apr929}
}
Kostenlos starten →