EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Pengaruh Keberadaan Material Butir Pasir terhadap Sifat Mekanik Timbunan pada Studi Kasus Disposal Pit SJS PT Bukit Asam (Persero) Tbk Unit Pertambangan Tanjung Enim

Muhammad Qistan Hafits, Eddy Ibrahim, Taufik Toha

Ranah Research : Journal of Multidisciplinary Research and Development · 30.05.2026 · 8 (3) · 2071-2081

DOI: 10.38035/rrj.v8i3.2109 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Ranah Research : Journal of Multidisciplinary Research and Development, online erschienen am 30.05.2026. Verfasst von Muhammad Qistan Hafits und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Embankment slope stability is a critical challenge in open-pit coal mining operations, particularly within the Tanjung Enim Mining Unit (UPTE) of PT Bukit Asam Tbk. This study investigates the influence of varying clay and sand compositions on the physical and mechanical properties of embankment geomaterials to determine the optimal configuration for operational stability. An experimental research design was conducted using material samples from Pit SJS, involving five composition variations: 100% clay; 75% clay – 25% sand; 50% clay – 50% sand; 25% clay – 75% sand; and 100% sand. Geotechnical parameters were evaluated through Standard Proctor compaction tests and Direct Shear tests to determine maximum dry density, optimum moisture content, bearing capacity, cohesion, and internal friction angle. The results demonstrate that both maximum dry density and bearing capacity exhibit an increasing trend as sand content rises, reaching peak values at the 50% clay – 50% sand composition before declining at higher sand ratios. Conversely, optimum moisture content significantly decreases as sand content increases. Shear strength analysis reveals that cohesion reaches its maximum at the 50/50 ratio, while pure sand (100% sand) exhibits significant "apparent cohesion" due to the interlocking effect of sand grains, which enhances shear resistance despite the material's non-cohesive theoretical nature. Slope stability simulations indicate that the 50% clay – 50% sand mixture provides the most superior mechanical performance for structured benching, ensuring a Safety Factor (SF) 1.35. This study concludes that an equal balance of clay and sand optimizes stability by combining cohesive bonding with high bearing capacity and grain interlocking.

Zitieren

APA

Hafits, M. Q., Ibrahim, E., & Toha, T. (2026). Pengaruh Keberadaan Material Butir Pasir terhadap Sifat Mekanik Timbunan pada Studi Kasus Disposal Pit SJS PT Bukit Asam (Persero) Tbk Unit Pertambangan Tanjung Enim. Ranah Research : Journal of Multidisciplinary Research and Development, 8(3), 2071-2081. https://doi.org/10.38035/rrj.v8i3.2109

Vancouver

Hafits MQ, Ibrahim E, Toha T. Pengaruh Keberadaan Material Butir Pasir terhadap Sifat Mekanik Timbunan pada Studi Kasus Disposal Pit SJS PT Bukit Asam (Persero) Tbk Unit Pertambangan Tanjung Enim. Ranah Research : Journal of Multidisciplinary Research and Development. 2026;8(3):2071-2081. doi:10.38035/rrj.v8i3.2109

BibTeX
@article{Hafits2026,
  author = {Hafits, Muhammad Qistan and Ibrahim, Eddy and Toha, Taufik},
  title = {Pengaruh Keberadaan Material Butir Pasir terhadap Sifat Mekanik Timbunan pada Studi Kasus Disposal Pit SJS PT Bukit Asam (Persero) Tbk Unit Pertambangan Tanjung Enim},
  journal = {Ranah Research : Journal of Multidisciplinary Research and Development},
  year = {2026},
  volume = {8},
  number = {3},
  pages = {2071--2081},
  doi = {10.38035/rrj.v8i3.2109}
}
Kostenlos starten →