EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication and Performance Analysis of Automobile Brake Pad, using Recycled and Eco-Friendly Materials

Md. Ashraful Islam, Md. Mizanur Rahman, Abu Bakkar

SciEn Conference Series: Engineering · 02.08.2026 · 4 · 142-148

DOI: 10.38032/scse.2026.4.67 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SciEn Conference Series: Engineering, online erschienen am 02.08.2026. Verfasst von Md. Ashraful Islam und 2 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The pursuit of sustainable automobile solutions has led to development of eco-friendly brake pads using a hybrid composite of coconut shell, rice husk, steel fiber, Al powder, brass powder, Si and epoxy resin. Three samples of brake pad were tested across seven performance parameters, including frictional coefficient, density, water absorption, porosity, flexural strength, compressive strength and mechanical stability. Sample 01 exhibited a static friction coefficient 0f 0.42 at a slide angle of 23.26 , while sample 2 showed 0.42 at 22.95 , both outperforming (0.39 at 21.30 ). Density measurement ranged from 2.02-2.30 g/ , with minimal variation across samples. Water absorption and apparent porosity were within 6.55-7.81% and 14.36-22.24 respectively, indicating controlled fluid uptake. Flexural and compressive strengths for the top performing samples reached 39 MPa and 207.25MPa respectively, demonstrating reliability comparable to conventional brake pads. But the dynamic friction test was unable to be perform because of unavailability of experimental equipment. Overall sample 1 and 2 consistently achieved superior performance, suggesting optimized material composition. These findings quantitatively validate that eco-friendly brake pads can meet industry standards while reducing environmental impact, highlighting their potential for sustainable automobile applications. Further optimization and test are recommended to enhance performance consistency for commercial-scale production.

Zitieren

APA

Islam, M. A., Rahman, M. M., & Bakkar, A. (2026). Fabrication and Performance Analysis of Automobile Brake Pad, using Recycled and Eco-Friendly Materials. SciEn Conference Series: Engineering, 4, 142-148. https://doi.org/10.38032/scse.2026.4.67

Vancouver

Islam MA, Rahman MM, Bakkar A. Fabrication and Performance Analysis of Automobile Brake Pad, using Recycled and Eco-Friendly Materials. SciEn Conference Series: Engineering. 2026;4:142-148. doi:10.38032/scse.2026.4.67

BibTeX
@article{Islam2026,
  author = {Islam, Md. Ashraful and Rahman, Md. Mizanur and Bakkar, Abu},
  title = {Fabrication and Performance Analysis of Automobile Brake Pad, using Recycled and Eco-Friendly Materials},
  journal = {SciEn Conference Series: Engineering},
  year = {2026},
  volume = {4},
  pages = {142--148},
  doi = {10.38032/scse.2026.4.67}
}
Kostenlos starten →