Experimental Analysis of Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite Reinforced with Different Materials
SciEn Conference Series: Engineering · 02.08.2026 · 4 · 537-342
DOI: 10.38032/scse.2026.4.235 ↗Kurz gefasst
Fachartikel in der Zeitschrift SciEn Conference Series: Engineering, online erschienen am 02.08.2026. Verfasst von S. M. Kamrul Hossen und 3 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work reports on the synthesis and characterization of novel aluminum-based hybrid metal matrix composites (MMCs) reinforced with combinations of titanium (Ti), nickel (Ni), and magnesium (Mg) by a stir casting process. Three compositions (all having 88 wt.% Al and 12 wt.% total reinforcement) were prepared: (i) 88Al–5Ti–4Ni–3Mg, (ii) 88Al–4Ti–3Ni–5Mg, and (iii) 88Al–3Ti–5Ni–4Mg. The microstructure was examined by scanning electron microscopy (SEM), and mechanical properties were measured via Brinell hardness, uniaxial tensile, and Charpy impact tests. Results show effective incorporation of the ceramic/metallic reinforcements into the Al matrix with generally uniform particle distribution. The composite containing 5 %Ti–4 %Ni–3 %Mg (case i) exhibited the highest ultimate tensile strength (≈270 MPa) and impact strength (≈3.1 J/cm²), whereas the sample with 3 %Ti–5 %Ni–4 %Mg (case iii) achieved the greatest Brinell hardness (≈70 BHN). Increasing Ni content tended to refine the microstructure (reducing average grain size from ~0.96 µm to 0.83 µm) and raised hardness, but higher Ni also slightly reduced ductility. The findings demonstrate that hybrid reinforcement can significantly enhance hardness and strength of Al alloys, consistent with known MMC behavior. Such light-weight composites with tailored Ti/Ni/Mg ratios show promise for high-strength applications in aerospace and automotive sectors.
Zitieren
APA
Hossen, S. M. K., Nishan, P. B., Shuvo, P. B., & Ahamed, J. U. (2026). Experimental Analysis of Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite Reinforced with Different Materials. SciEn Conference Series: Engineering, 4, 537-342. https://doi.org/10.38032/scse.2026.4.235
Vancouver
Hossen SMK, Nishan PB, Shuvo PB, Ahamed JU. Experimental Analysis of Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite Reinforced with Different Materials. SciEn Conference Series: Engineering. 2026;4:537-342. doi:10.38032/scse.2026.4.235
BibTeX
@article{Hossen2026,
author = {Hossen, S. M. Kamrul and Nishan, Paban Barua and Shuvo, Pritom Barua and Ahamed, Jamal Uddin},
title = {Experimental Analysis of Microstructure and Mechanical Properties of Aluminum Metal Matrix Composite Reinforced with Different Materials},
journal = {SciEn Conference Series: Engineering},
year = {2026},
volume = {4},
pages = {537--342},
doi = {10.38032/scse.2026.4.235}
}
EUVIMED