EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Construction of Boiling Heat Transfer Apparatus

Mohammad Rahat Hosen, Paban Barua Nishan, Pritom Barua Shuvo, Bodius Salam

SciEn Conference Series: Engineering · 02.08.2026 · 4 · 301-306

DOI: 10.38032/scse.2026.4.141 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SciEn Conference Series: Engineering, online erschienen am 02.08.2026. Verfasst von Mohammad Rahat Hosen und 3 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Boiling heat transfer is a fundamental mechanism in thermal systems, widely applied in power generation and chemical processing. This work presents the design, development, and evaluation of a laboratory-scale apparatus to examine boiling heat transfer under controlled conditions. The setup consists of a heated metal plate submerged in water, equipped with thermocouples to record both wall and fluid saturation temperatures. A circulation unit was incorporated to maintain steady operating conditions. Experiments were performed by varying the wall superheat to capture different boiling regimes. Heat transfer coefficients (h) and heat fluxes were determined through three approaches: direct power input and surface area calculation, an empirical correlation, and the Rohsenow nucleate boiling model. Results showed that both h and heat flux increased with rising wall superheat, consistent with theoretical expectations. The empirical method produced h values in the range of 695 to 4.34×104 W/m²·°C. Although the measured heat flux followed predicted trends, slight deviations were attributed to thermal losses through the system. The study demonstrates that the apparatus can reliably capture boiling behavior, while also highlighting design constraints. Enhancing insulation and scaling the system could further improve accuracy and extend applicability to industrial conditions.

Zitieren

APA

Hosen, M. R., Nishan, P. B., Shuvo, P. B., & Salam, B. (2026). Design and Construction of Boiling Heat Transfer Apparatus. SciEn Conference Series: Engineering, 4, 301-306. https://doi.org/10.38032/scse.2026.4.141

Vancouver

Hosen MR, Nishan PB, Shuvo PB, Salam B. Design and Construction of Boiling Heat Transfer Apparatus. SciEn Conference Series: Engineering. 2026;4:301-306. doi:10.38032/scse.2026.4.141

BibTeX
@article{Hosen2026,
  author = {Hosen, Mohammad Rahat and Nishan, Paban Barua and Shuvo, Pritom Barua and Salam, Bodius},
  title = {Design and Construction of Boiling Heat Transfer Apparatus},
  journal = {SciEn Conference Series: Engineering},
  year = {2026},
  volume = {4},
  pages = {301--306},
  doi = {10.38032/scse.2026.4.141}
}
Kostenlos starten →