Friction and Wear Mechanisms of Cu/ta-C Coatings Under PAO-4 and PAO-4 with MoDTC Lubrication
Journal of Engineering Advancements · 2020
DOI: 10.38032/jea.2020.04.009 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Engineering Advancements, 2020. Verfasst von Decelyne Elly Binjua und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 10 Literaturangaben.
Abstract (Originalsprache)
The tribological behavior of various types of DLC coatings in formulated and non-formulated lubricants are needed for proper usage of these coatings. In this research, the friction and wear mechanism of four different DLC coatings in poly-alpha-olefin type 4 (PAO-4) with and without MoDTC were investigated using ball-on-disc tribometer. One ta-C (tetrahedral amorphous carbon) and three Cu/ta-C (copper doped ta-C) with different sputter power of 50 W, 150 W, and 200 W coatings were deposited on silicon wafers by using FCVA (filtered cathodic vacuum arc) technique for this research. The results indicate that ta-C coating on silicon wafer has the lowest average friction coefficient (CoF) and better wear resistance than Cu/ta-C coating when lubricated under PAO-4 oil with MoDTC. Cu/ta-C with sputter powers of 150 W and 200 W exhibited the highest average friction coefficient under PAO-4 oil with MoDTC. Meanwhile, the average CoF for all samples were similar under PAO-4 base oil. In terms of wear, ta-C coating showed the highest wear rate under PAO-4 base oil then followed by Cu/ta-C with sputter power of 50 W. Nonetheless, Cu/ta-C with sputter powers of 150 W and 200 W exhibited significantly low wear rate under PAO-4 base oil compared to PAO-4 oil with MoDTC.
Zitieren
APA
Binjua, D. E., Kim, S., Jang, Y., & Kim, J. (2020). Friction and Wear Mechanisms of Cu/ta-C Coatings Under PAO-4 and PAO-4 with MoDTC Lubrication. Journal of Engineering Advancements. https://doi.org/10.38032/jea.2020.04.009
Vancouver
Binjua DE, Kim S, Jang Y, Kim J. Friction and Wear Mechanisms of Cu/ta-C Coatings Under PAO-4 and PAO-4 with MoDTC Lubrication. Journal of Engineering Advancements. 2020. doi:10.38032/jea.2020.04.009
BibTeX
@article{Binjua2020,
author = {Binjua, Decelyne Elly and Kim, Seock-Sam and Jang, Young-Jun and Kim, Jong-Kuk},
title = {Friction and Wear Mechanisms of Cu/ta-C Coatings Under PAO-4 and PAO-4 with MoDTC Lubrication},
journal = {Journal of Engineering Advancements},
year = {2020},
doi = {10.38032/jea.2020.04.009}
}
EUVIMED